FreeEvery fee straight from the official city and county fee schedules. No signup.

Gila County, AZ Permit Fees (2026)

Building permit fees for unincorporated Gila County, with a free permit fee calculator. Inside city limits? Pick your city below; incorporated cities have their own fee schedules.

Unincorporated communities such as Pine, Strawberry and Tonto Basin pay these county rates rather than a city schedule.

A note on these figures from the official schedule. Details

Residential electrical, plumbing and mechanical work done under a building permit for a home, addition or remodel is included in the building permit fee; the trade permit fees shown here apply to stand-alone trade jobs. See the official notice

In Unincorporated Gila County, a building permit for a $50,000 remodel runs $1,063.01 in permit fees, a $20,000 re-roof $530.06, an HVAC change-out $35.00, a $10,000 electrical panel upgrade or rewire $50.00, and a whole-house repipe $175.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume one compressor and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Gila County Fee Schedule for Building Safety, Permits and Services (effective March 22, 2007; revised 12-2019)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at (928) 402-4224.

How Unincorporated Gila County values a job: Building permit fees are priced from a construction valuation taken from the Building Valuation Data table in the county fee schedule (square foot costs per the Building Safety Journal, August 2005), or from actual valuation or the Means Construction Cost Guide for other structures.

Schedule effective March 22, 2007. Last verified: October 13, 2026

Jurisdictions in Gila County

Jobs inside city limits are permitted by the city, not the county. Across Gila County's 4 covered jurisdictions, a building permit for a $50,000 remodel runs from $221.10 (Star Valley) to $1,503.60 (Globe).

Unincorporated Gila CountyGlobePaysonStar Valley

Unincorporated Gila County Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Unincorporated Gila County

Residential (1–2 family): Built-in private swimming pool, spa or hot tub
tiered rates by job value, minimum $350.00‡
The $25,001 to $50,000 band base is printed as $391.75, $0.50 above the $391.25 the band below reaches at $25,000, so jobs in that band compute $0.50 above the table's own continuation (at $50,000, $644.25 vs the $643.75 the next band starts from); stored as printed.
Up to $500
$23.50
Over $500, up to $2,000
$23.50 plus $3.05 per additional $100
Over $2,000, up to $25,000
$69.25 plus $14.00 per additional $1,000
Over $25,000, up to $50,000
$391.75 plus $10.10 per additional $1,000
Over $50,000, up to $100,000
$643.75 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$993.75 plus $5.60 per additional $1,000
Over $500,000, up to $1,000,000
$3,233.75 plus $4.75 per additional $1,000
Over $1,000,000
$5,608.75 plus $3.65 per additional $1,000
Residential (1–2 family): Unzoned area: home, addition, remodel, garage, carport, ramada, accessory building, private pool or other residential structure
$175.00 flat
Commercial / 3+ units: Built-in public swimming pool, spa or hot tub
tiered rates by job value, minimum $500.00‡
The $25,001 to $50,000 band base is printed as $391.75, $0.50 above the $391.25 the band below reaches at $25,000, so jobs in that band compute $0.50 above the table's own continuation (at $50,000, $644.25 vs the $643.75 the next band starts from); stored as printed.
Up to $500
$23.50
Over $500, up to $2,000
$23.50 plus $3.05 per additional $100
Over $2,000, up to $25,000
$69.25 plus $14.00 per additional $1,000
Over $25,000, up to $50,000
$391.75 plus $10.10 per additional $1,000
Over $50,000, up to $100,000
$643.75 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$993.75 plus $5.60 per additional $1,000
Over $500,000, up to $1,000,000
$3,233.75 plus $4.75 per additional $1,000
Over $1,000,000
$5,608.75 plus $3.65 per additional $1,000
Commercial / 3+ units: Unzoned area: multi-family, commercial, industrial, church, school, public building, public pool or other commercial structure, new or addition
$250.00 flat
New building, addition, or remodel (Table 1-A, priced on job value)
tiered rates by job value
The $25,001 to $50,000 band base is printed as $391.75, $0.50 above the $391.25 the band below reaches at $25,000, so jobs in that band compute $0.50 above the table's own continuation (at $50,000, $644.25 vs the $643.75 the next band starts from); stored as printed.
Up to $500
$23.50
Over $500, up to $2,000
$23.50 plus $3.05 per additional $100
Over $2,000, up to $25,000
$69.25 plus $14.00 per additional $1,000
Over $25,000, up to $50,000
$391.75 plus $10.10 per additional $1,000
Over $50,000, up to $100,000
$643.75 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$993.75 plus $5.60 per additional $1,000
Over $500,000, up to $1,000,000
$3,233.75 plus $4.75 per additional $1,000
Over $1,000,000
$5,608.75 plus $3.65 per additional $1,000
Plan Review Fee (does not apply to some listed rules)
65% of the permit fee

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Unincorporated Gila County

Homeowners and contractors planning a project check Unincorporated Gila County building permit fees here first. One sponsor per trade, $39 a month, month to month.

Run a contracting business? Leave your email and we'll send availability and how it works.

Or see sponsor details

Unincorporated Gila County Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

$
$2,500$500,000
Estimated building permit fee
$1,063.01
Included in this total
Building Permit Fee$644.25
$391.75 + 25 × $10.10 per $1,000 over $25,000 (see the fee table above)
The $25,001 to $50,000 band base is printed as $391.75, $0.50 above the $391.25 the band below reaches at $25,000, so jobs in that band compute $0.50 above the table's own continuation (at $50,000, $644.25 vs the $643.75 the next band starts from); stored as printed.
Plan Review Fee$418.76
Total Estimate$1,063.01
A note on these figures from the official schedule. Details

Residential electrical, plumbing and mechanical work done under a building permit for a home, addition or remodel is included in the building permit fee; the trade permit fees shown here apply to stand-alone trade jobs. See the official notice

Building permit fees are priced from a construction valuation taken from the Building Valuation Data table in the county fee schedule (square foot costs per the Building Safety Journal, August 2005), or from actual valuation or the Means Construction Cost Guide for other structures.

Estimate only. Confirm with the Unincorporated Gila County building department before applying. Phone: (928) 402-4224. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Unincorporated Gila County

Homeowners and contractors planning a project check Unincorporated Gila County building permit fees here first. One sponsor per trade, $39 a month, month to month.

Run a contracting business? Leave your email and we'll send availability and how it works.

Or see sponsor details

How to Apply for a Permit in Unincorporated Gila County

Submit building plans by email as PDF documents to communitydevelopment@gilacountyaz.gov, or in person at the Community Development offices in Globe (745 N Rose Mofford Way) or Payson (608 E Hwy 260). Include two sets of plans that meet the design criteria, with two site plans. Permits from other departments, such as wastewater or floodplain, may be needed before a building permit can be issued. Once plans are approved, purchase the building permit; you can pay by credit or debit card over the phone, or by cash or check payable to Gila County. You will receive the list of required inspections when the permit is issued; call either office to schedule an inspection. Call either office for electrical, plumbing and mechanical permits. The county does not list an online permit portal.

Source: Unincorporated Gila County application instructions

Building Department Contact
Phone
(928) 402-4224 (Globe office); (928) 474-7110 (Payson office)
Address
745 N Rose Mofford Way, Globe, AZ 85501 (Payson office: 608 E Hwy 260, Payson, AZ 85541)
Hours
Monday to Friday, 8am to 5pm

Unincorporated Gila County Permit Fee FAQs

How Much Does a Building Permit Cost in Unincorporated Gila County?

The building permit for a $50,000 residential remodel runs $1,063.01, including the documented surcharges and minimum fees. The estimate is built from Unincorporated Gila County's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Unincorporated Gila County?

The roofing permit for a $20,000 residential re-roof runs $530.06, based on Unincorporated Gila County's sourced fee schedule.

How Are Permit Fees Calculated in Unincorporated Gila County?

A residential building permit is tiered rates by job value. Electrical permits are flat fees; Plumbing permits are priced per fixture; Mechanical / HVAC permits are priced per compressor; Roofing permits scale with the value of the job. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Unincorporated Gila County?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (65% of the permit fee) and Plan Review Fee (Roofing) (65% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Do Pine and Strawberry Pay Gila County Permit Fees?

Yes. Pine, Strawberry and Tonto Basin are unincorporated, so a job there is permitted by Gila County and pays the fees on this page. Inside city limits the city's own schedule applies; pick the city above.

Where Do These Fees Come From?

Every figure on this page is sourced from Gila County Fee Schedule for Building Safety, Permits and Services (effective March 22, 2007; revised 12-2019). See the official schedule. Last verified .
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.