FreeEvery fee straight from the official city and county fee schedules. No signup.

Pima County, AZ Permit Fees (2026)

Building permit fees for unincorporated Pima County, with a free permit fee calculator. Inside city limits? Pick your city below; incorporated cities have their own fee schedules.

In Unincorporated Pima County, a building permit for a remodel runs $223.25 in permit fees, a $10,000 HVAC change-out $96.00, a $10,000 electrical panel upgrade or rewire $96.00, and a $10,000 whole-house repipe $267.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Pima County Development Services Department Fees, Effective July 1, 2026 (FY 2026/27)

Covers building, electrical, plumbing, and mechanical/HVAC permits.

Apply online at the Unincorporated Pima County permit portal, or call 520-724-9000.

How Unincorporated Pima County values a job: Building permit fees are figured from floor area: the most recent International Code Council square foot construction cost for the occupancy group and construction type, multiplied by 1.096% for the first 1,000 sq ft and 0.588% for each square foot above that, per the county fee schedule.

Schedule effective July 1, 2026. Last verified: October 13, 2026

Jurisdictions in Pima County

Jobs inside city limits are permitted by the city, not the county. Across Pima County's 6 covered jurisdictions, a building permit for a $50,000 remodel runs from $223.25 (Unincorporated Pima County) to $1,575.62 (Tucson).

Unincorporated Pima County Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Unincorporated Pima County

Residential (1–2 family): Remodel of a one- or two-family home (R-3, Type VB, 40% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($175.92 per sq ft for R-3, Type VB; the schedule's Appendix B prints $169.09), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 40% for a tenant improvement or remodel (item 15).
Up to 1,000 sq ft
$0.77 per sq ft
Over 1,000 sq ft
$0.41 per sq ft
Residential (1–2 family): New one- or two-family home or addition (R-3, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($175.92 per sq ft for R-3, Type VB; the schedule's Appendix B prints $169.09), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$1.93 per sq ft
Over 1,000 sq ft
$1.03 per sq ft
Residential (1–2 family): Garage, porch, or accessory structure (Utility, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($71.07 per sq ft for U, Type VB; the schedule's Appendix B prints $66.20), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$0.78 per sq ft
Over 1,000 sq ft
$0.42 per sq ft
Residential (1–2 family): Home built from an approved model plan, site off model (R-3, Type VB, 80% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($175.92 per sq ft for R-3, Type VB; the schedule's Appendix B prints $169.09), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 80% for a site off an approved model (item 17).
Up to 1,000 sq ft
$1.54 per sq ft
Over 1,000 sq ft
$0.83 per sq ft
Residential (1–2 family): Model home plan for a subdivision (R-3, Type VB, 20% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($175.92 per sq ft for R-3, Type VB; the schedule's Appendix B prints $169.09), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 20% for a model plan (item 16).
Up to 1,000 sq ft
$0.39 per sq ft
Over 1,000 sq ft
$0.21 per sq ft
Commercial / 3+ units: Tenant improvement or remodel, office or business (B, Type VB, 40% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($213.27 per sq ft for B, Type VB; the schedule's Appendix B prints $206.96), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 40% for a tenant improvement or remodel (item 15).
Up to 1,000 sq ft
$0.93 per sq ft
Over 1,000 sq ft
$0.50 per sq ft
Commercial / 3+ units: New office or business building (B, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($213.27 per sq ft for B, Type VB; the schedule's Appendix B prints $206.96), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$2.34 per sq ft
Over 1,000 sq ft
$1.25 per sq ft
Commercial / 3+ units: Tenant improvement or remodel, restaurant or bar (A-2, Type VB, 40% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($204.58 per sq ft for A-2 restaurants, Type VB; the schedule's Appendix B prints $198.66), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 40% for a tenant improvement or remodel (item 15).
Up to 1,000 sq ft
$0.90 per sq ft
Over 1,000 sq ft
$0.48 per sq ft
Commercial / 3+ units: Tenant improvement or remodel, retail (M, Type VB, 40% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($135.89 per sq ft for M, Type VB; the schedule's Appendix B prints $131.97), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 40% for a tenant improvement or remodel (item 15).
Up to 1,000 sq ft
$0.60 per sq ft
Over 1,000 sq ft
$0.32 per sq ft
Commercial / 3+ units: New apartment or multifamily building (R-2, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($158.18 per sq ft for R-2, Type VB; the schedule's Appendix B prints $153.58), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$1.73 per sq ft
Over 1,000 sq ft
$0.93 per sq ft
Commercial / 3+ units: New moderate-hazard storage building (S-1, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($87.73 per sq ft for S-1, Type VB; the schedule's Appendix B prints $85.17), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$0.96 per sq ft
Over 1,000 sq ft
$0.52 per sq ft
Commercial / 3+ units: New restaurant, bar, or banquet hall (A-2, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($204.58 per sq ft for A-2 restaurants, Type VB; the schedule's Appendix B prints $198.66), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$2.24 per sq ft
Over 1,000 sq ft
$1.20 per sq ft
Commercial / 3+ units: New retail or mercantile building (M, Type VB, per sq ft)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($135.89 per sq ft for M, Type VB; the schedule's Appendix B prints $131.97), times 1.096% for the first 1,000 sq ft and 0.588% above that.
Up to 1,000 sq ft
$1.49 per sq ft
Over 1,000 sq ft
$0.80 per sq ft
Commercial / 3+ units: Shell building, office or business (B, Type VB, 80% of new-construction fee)
tiered rates by sq ft‡
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($213.27 per sq ft for B, Type VB; the schedule's Appendix B prints $206.96), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 80% for a shell building (item 14).
Up to 1,000 sq ft
$1.87 per sq ft
Over 1,000 sq ft
$1.00 per sq ft
Manufactured building or recreational vehicle with utility connections
$27.00 flat
Other major structure (cell tower, commercial antenna, large water or fuel tank)
$449.00 flat
Other minor structure (small water tank, residential antenna, flagpole, portable spa)
$112.00 flat
Base Fee for Permits Requiring Inspection
$69.00†
Additional Plan Review (Per Hour, One-Hour Minimum) (if applicable)
$69.00
After-Hours Inspection (Two-Hour Minimum) (if applicable)
$138.00
Certificate of Occupancy (if applicable)
$69.00
Permit Renewal or Extension (Minimum) (if applicable)
$137.00
Re-inspection Fee (if applicable)
$69.00
Special Investigation (Wind, Fire, or Structural Damage) (if applicable)
$69.00
Work Started Before Permit Issuance (if applicable)
25% of the permit fee

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Unincorporated Pima County

Homeowners and contractors planning a project check Unincorporated Pima County building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Unincorporated Pima County Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

4 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$223.25
Included in this total
Building Permit Fee$154.25‡
200 × $0.7712 per sq ft (see the fee table above)
The schedule applies the most recent ICC square foot cost table; this uses the ICC February 2026 cost the county's own fee calculators use ($175.92 per sq ft for R-3, Type VB; the schedule's Appendix B prints $169.09), times 1.096% for the first 1,000 sq ft and 0.588% above that, then 40% for a tenant improvement or remodel (item 15).
Base Fee for Permits Requiring Inspection$69.00
Total Estimate$223.25

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the Unincorporated Pima County building department before applying. Apply online. Phone: 520-724-9000. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Unincorporated Pima County

Homeowners and contractors planning a project check Unincorporated Pima County building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Unincorporated Pima County

Apply for a building, electrical, plumbing, or mechanical permit online through the Pima County Permit Gateway, which walks you step by step to the right permit and also handles plan submittal, fee payment, and permit status. Development Services staff can help at 520-724-9000 or in person at 201 N. Stone Ave. in Tucson, Monday through Friday from 8 am to 4 pm. Invoices are paid only through the Permit Gateway; the county never asks for a wire transfer.

Source: Unincorporated Pima County application instructions

Apply online: Unincorporated Pima County permit portal
Building Department Contact
Fee questions
520-724-8800
Address
201 N. Stone Ave., Tucson, AZ 85701
Hours
Lobby open Monday through Friday, 8 am to 4 pm, closed holidays

Unincorporated Pima County Permit Fee FAQs

How Much Does a Building Permit Cost in Unincorporated Pima County?

The building permit for a residential remodel runs $223.25, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Unincorporated Pima County's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Are Permit Fees Calculated in Unincorporated Pima County?

A residential building permit is tiered rates by sq ft. Electrical, Plumbing, and Mechanical / HVAC permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from Pima County Development Services Department Fees, Effective July 1, 2026 (FY 2026/27). See the official schedule. Last verified .
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.