PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Baker County, FL Permit Fees (2026)

Building permit fees for unincorporated Baker County, with a free permit fee calculator. Inside city limits? Pick your city below; incorporated cities have their own fee schedules.

Jump to Permit Fee Calculator
HVAC Permit
$79.00
$10,000 change-out
Electrical Permit
$79.00
$10,000 panel or rewire
Plumbing Permit
$119.00
15-fixture scope

In Unincorporated Baker County, a $10,000 HVAC change-out runs $79.00 in permit fees, a $10,000 electrical panel upgrade or rewire $79.00, and a $10,000 whole-house repipe $119.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Source

Baker County Community Development Department permit fees page (captured September 15, 2026)

Covers building, electrical, plumbing, and mechanical/HVAC permits.

Official Fee Schedule

Last verified: September 16, 2026

This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed

Jurisdictions in Baker County

Jobs inside city limits are permitted by the city, not the county.

Unincorporated Baker CountyMacclenny

Unincorporated Baker County Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Unincorporated Baker County

Mobile Home HV/AC
$50.00 flat
Residential (1–2 family)
$75.00 flat
Commercial / 3+ units
$100.00 flat
State Fee
3% of the permit fee, minimum $4.00 (printed as $4.00 for permits $139.00 or under and 3% for permits over $139.00)†
Fire Plan Review (if applicable)
50% of the permit fee (initial review and one revision; additional revisions $10 per sheet)‡
Plan Review (if applicable)
50% of the permit fee (initial review and one revision; additional revisions $10 per sheet)‡
Re-Inspection Fee (if applicable)
$39.00 (first re-inspection; $49.00 each after)

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured HVAC Company in Unincorporated Baker County

Homeowners and contractors planning a project check Unincorporated Baker County mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Unincorporated Baker County Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work

Fees in Unincorporated Baker County are the same either way.

Rate type
Estimated mechanical / HVAC permit fee
$79.00
Mechanical / HVAC permit fee$75.00
$75.00 flat
State Fee$4.00
Total Estimate$79.00

Estimate only. Confirm with the Unincorporated Baker County building department before applying.

Sponsor This Page
Be the Featured HVAC Company in Unincorporated Baker County

Homeowners and contractors planning a project check Unincorporated Baker County mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Unincorporated Baker County Permit Fee FAQs

How Are Permit Fees Calculated in Unincorporated Baker County?

Electrical and Mechanical / HVAC permits are flat fees; Plumbing permits are priced per fixture. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Unincorporated Baker County?

On top of the base permit fee, the sourced schedule adds State Fee (3% of the permit fee, minimum $4.00 (printed as $4.00 for permits $139.00 or under and 3% for permits over $139.00)). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Unincorporated Baker County?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from Baker County Community Development Department permit fees page (captured September 15, 2026). See the official schedule. Last verified .

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save.