PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Bell, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Bell, straight from the official fee schedule, with a free permit fee calculator below.

Jump to Permit Fee Calculator

Gilchrist County administers building permits for the Town of Bell under a June 3, 2024 interlocal agreement; permits are issued by the county at the county's fee schedule. See the Gilchrist County fee schedule

Building Permit
$154.25
200 sq ft remodel area
Roofing Permit
$154.25
$20,000 re-roof
Electrical Permit
$154.25
200 A service

In Bell, a building permit for a $50,000 remodel runs $154.25 in permit fees, a $20,000 re-roof $154.25, and a $10,000 electrical panel upgrade or rewire $154.25. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and 200 A service. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Source

Gilchrist County Community Development Building and Zoning Fee Schedule (April 2024)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits. Minimum permit fee: $150.00.

Gilchrist County administers building permits for the Town of Bell under a June 3, 2024 interlocal agreement; permits are issued by the county at the county's fee schedule. See the Gilchrist County fee schedule

Official Fee Schedule

Last verified: September 16, 2026

This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed

Bell Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Electrical Permit Fees in Bell

All projects
$95.00 per 200 amps
Building Permit Surcharge (F.S. 468.631)
1.5% of the permit fee, minimum $2.00†
Building Permit Surcharge (F.S. 553.721)
1% of the permit fee, minimum $2.00†
Re-Inspection Fee (if applicable)
$65.00 per inspection

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

Sponsor This Page
Be the Featured Electrician in Bell

Homeowners and contractors planning a project check Bell electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Bell Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
amps
60400 amps
Estimated electrical permit fee
$154.25
Electrical permit fee$95.00
200 ampss × $95.00 per 200 amps
Minimum permit fee adjustment$55.00
Minimum permit fee: $150.00
Building Permit Surcharge (F.S. 468.631)$2.25
Building Permit Surcharge (F.S. 553.721)$2.00
Total Estimate$154.25

Permit fees for Bell are administered by Gilchrist County; the fees shown are the Gilchrist County schedule.

Estimate only. Confirm with the Gilchrist County building department before applying.

Sponsor This Page
Be the Featured Electrician in Bell

Homeowners and contractors planning a project check Bell electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Bell Permit Fee FAQs

How Much Does a Building Permit Cost in Bell?

The building permit for a $50,000 residential remodel runs $154.25, assuming a 200 sq ft remodel area where the schedule prices per unit, including the documented surcharges and minimum fees. The estimate is built from Bell's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Bell?

The roofing permit for a $20,000 residential re-roof runs $154.25, based on Bell's sourced fee schedule.

How Are Permit Fees Calculated in Bell?

A residential building permit is $0.10 per sq ft under roof, minimum $100.00. Electrical permits are priced per amp; Plumbing permits are priced per bath; Mechanical / HVAC permits are priced per system; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Is the Minimum Permit Fee in Bell?

The sourced schedule sets a minimum permit fee of $150.00; small jobs pay at least that much before surcharges. The calculator applies it automatically.

What Surcharges Are Added to Permits in Bell?

On top of the base permit fee, the sourced schedule adds Building Permit Surcharge (F.S. 468.631) (1.5% of the permit fee, minimum $2.00) and Building Permit Surcharge (F.S. 553.721) (1% of the permit fee, minimum $2.00). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Bell?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from Gilchrist County Community Development Building and Zoning Fee Schedule (April 2024). See the official schedule. Last verified .

Other Jurisdictions in Gilchrist County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Gilchrist CountyBellTrenton

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save.