Fanning Springs, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Fanning Springs, straight from the official fee schedule, with a free permit fee calculator below.

In Fanning Springs, a building permit for a remodel runs $254.00 in permit fees, a $20,000 re-roof $129.00, an HVAC change-out $104.00, and an electrical panel upgrade or rewire $104.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area, one system, and 200 A service. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator

Source

Community Development - Building Fees (Copy-of-FS-Schedule-Fees.pdf)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Apply online at the Fanning Springs permit portal, or call (352) 463-2855.

Last verified: September 26, 2026

This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed

Fanning Springs Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Fanning Springs

All projects

$100.00 per system (HVAC/exhaust/ventilation)

Re-Inspection Fee

$100.00 per inspection

State Building Code Administrators Surcharge (F.S. 468.631)

1.5% of the permit fee, minimum $2.00†

State Building Permit Surcharge (F.S. 553.721)

1% of the permit fee, minimum $2.00†

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

Sponsor This Page

Be the Featured HVAC Company in Fanning Springs

Homeowners and contractors planning a project check Fanning Springs mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Fanning Springs Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type

Project type

Kind of work

System (HVAC/exhaust/ventilation)

system

15 systems

Estimated mechanical / HVAC permit fee

$104.00

Included in this total

Mechanical / HVAC Permit Fee$100.00

1 system (HVAC/exhaust/ventilation) × $100.00 per system (HVAC/exhaust/ventilation)

State Building Code Administrators Surcharge (F.S. 468.631)$2.00

State Building Permit Surcharge (F.S. 553.721)$2.00

Total Estimate$104.00

Not included in this total

Re-Inspection Fee$100.00 / inspection

Charged per inspection; depends on your project's number of inspections.

Estimate only. Confirm with the Fanning Springs building department before applying. Apply online. Phone: (352) 463-2855. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page

Be the Featured HVAC Company in Fanning Springs

Homeowners and contractors planning a project check Fanning Springs mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Fanning Springs

The City of Fanning Springs runs its own Building Department and takes permit applications online through the iWorQ Citizen Portal, linked from the city's Building Department page. Choose the application you need (Residential Permit, Mobile Home Permit, Zoning Permit, or Division 2 Contractors for electrical, plumbing, mechanical, gas and fuel, fire, and roofing sub-permits), search for the property and contractor, complete the form, upload the site plan, floor plan and any other documents, sign, and submit. A Zoning Permit may be needed before a building or mobile home permit can be approved, and jobs over $5,000 need a Notice of Commencement. Inspections are requested from the portal's permit search using the Request An Inspection column. For questions, contact the Building Official at City Hall.

Source: Fanning Springs application instructions

Apply online: Fanning Springs permit portal

Building Department Contact

Building Official: Leon Wright
Phone: (352) 463-2855 (mobile (352) 440-2034)
Email: fsbdpermit@gmail.com
Address: 17651 NW 90th Court, Fanning Springs, FL 32693
Hours: not published
Source: Official contact page

Fanning Springs Permit Fee FAQs

How Much Does a Building Permit Cost in Fanning Springs?

The building permit for a residential remodel runs $254.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Fanning Springs's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Fanning Springs?

The roofing permit for a $20,000 residential re-roof runs $129.00, based on Fanning Springs's sourced fee schedule.

How Are Permit Fees Calculated in Fanning Springs?

A residential building permit is $0.10 per sq ft (building area), minimum $100.00. Electrical permits are priced per amp; Plumbing permits are priced per bath; Mechanical / HVAC permits are priced per system; Roofing permits are flat fees for the default job, while other work is priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Fanning Springs?

On top of the base permit fee, the sourced schedule adds State Building Code Administrators Surcharge (F.S. 468.631) (1.5% of the permit fee, minimum $2.00) and State Building Permit Surcharge (F.S. 553.721) (1% of the permit fee, minimum $2.00). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Fanning Springs?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from Community Development - Building Fees (Copy-of-FS-Schedule-Fees.pdf). See the official schedule. Last verified September 26, 2026.

Other Jurisdictions in Levy County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Levy County BronsonFanning SpringsOtter Creek Williston

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save. Wondering whether fees changed this year? See which Florida fee schedules are new.