FreeEvery fee straight from the official city and county fee schedules. No signup.

Fanning Springs, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Fanning Springs, straight from the official fee schedule, with a free permit fee calculator below.

In Fanning Springs, a building permit for a $50,000 remodel runs $254.00 in permit fees, a $20,000 re-roof $129.00, and a $10,000 electrical panel upgrade or rewire $104.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and 200 A service. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Source

Community Development - Building Fees (Copy-of-FS-Schedule-Fees.pdf)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Last verified: September 6, 2026

This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed

Fanning Springs Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Roofing Permit Fees in Fanning Springs

Roof Over (recover existing roof)
$0.15 per sq ft (roof area)
Residential (1–2 family)
$125.00 flat
Commercial / 3+ units
$10.00 per square (100 sq ft)
FL Building Code Surcharge
1.5% of the permit fee, minimum $2.00
FL Homeowner Construction Recovery Surcharge
1% of the permit fee, minimum $2.00
Re-Inspection Fee
$100.00 per inspection

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

Sponsor This Page
Be the Featured Roofer in Fanning Springs

Homeowners and contractors planning a project check Fanning Springs roofing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Fanning Springs Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Rate type
Estimated roofing permit fee
$129.00
Roofing permit fee$125.00
$125.00 flat
FL Building Code Surcharge$2.00
FL Homeowner Construction Recovery Surcharge$2.00
Re-Inspection Fee$100.00 / inspection
Charged per inspection; not included in this total, as it depends on your project's unit count.
Total Estimate$129.00

Estimate only. Confirm with the Fanning Springs building department before applying.

Sponsor This Page
Be the Featured Roofer in Fanning Springs

Homeowners and contractors planning a project check Fanning Springs roofing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Fanning Springs Permit Fee FAQs

How Much Does a Building Permit Cost in Fanning Springs?

The building permit for a $50,000 residential remodel runs $254.00, assuming a 200 sq ft remodel area where the schedule prices per unit, including the documented surcharges and minimum fees. The estimate is built from Fanning Springs's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Fanning Springs?

The roofing permit for a $20,000 residential re-roof runs $129.00, based on Fanning Springs's sourced fee schedule.

How Are Permit Fees Calculated in Fanning Springs?

A residential building permit is $0.10 per sq ft (building area), minimum $100.00. Electrical permits are priced per amp; Plumbing permits are priced per bath; Mechanical / HVAC permits are priced per system; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Fanning Springs?

On top of the base permit fee, the sourced schedule adds FL Building Code Surcharge (1.5% of the permit fee, minimum $2.00) and FL Homeowner Construction Recovery Surcharge (1% of the permit fee, minimum $2.00). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Fanning Springs?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from Community Development - Building Fees (Copy-of-FS-Schedule-Fees.pdf). See the official schedule. Last verified .

Other Jurisdictions in Levy County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save.