Belleview, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Belleview, straight from the official fee schedule, with a free permit fee calculator below.

In Belleview, a building permit for a remodel runs $166.43 in permit fees, a re-roof $144.10, a $10,000 HVAC change-out $124.00, a $10,000 electrical panel upgrade or rewire $124.00, and a $10,000 whole-house repipe $124.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 2,000 sq ft roof. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator

Source

City of Belleview Building Division Fee Schedule (Effective July 1, 2026; adopted by Res. 26-03, 7-7-2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits. Minimum permit fee: $120.00.

Official Fee Schedule

Apply online at the Belleview permit portal, or call 352-245-7021.

Schedule effective July 7, 2026. Last verified: September 26, 2026

Schedule adopted under Florida's HB 803 permit fee rules (effective July 2026). What HB 803 changed

Belleview Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Belleview

All projects

$120.00 flat

State Building Code Administrators Surcharge (F.S. 468.631)

1.5% of the permit fee, minimum $2.00†

State Building Permit Surcharge (F.S. 553.721)

1% of the permit fee, minimum $2.00†

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

Sponsor This Page

Be the Featured HVAC Company in Belleview

Homeowners and contractors planning a project check Belleview mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Belleview Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type

Project type

Kind of work

Estimated mechanical / HVAC permit fee

$124.00

Included in this total

Mechanical / HVAC Permit Fee$120.00

$120.00 flat

State Building Code Administrators Surcharge (F.S. 468.631)$2.00

State Building Permit Surcharge (F.S. 553.721)$2.00

Total Estimate$124.00

Estimate only. Confirm with the Belleview building department before applying. Apply online. Phone: 352-245-7021. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page

Be the Featured HVAC Company in Belleview

Homeowners and contractors planning a project check Belleview mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Belleview

Belleview's Development Services Department issues building permits for properties inside the city limits. Contractors must first register with the city (homeowner-builders are exempt), then submit a complete permit application packet in person at 5525 SE 119th St. or by email to DSStaff@belleviewfl.org. Payment is due with the application; emailed applications receive an invoice with an online payment link within 1 to 2 business days, and you can check permit status on the city's BS&A Online portal. To schedule an inspection, call (352) 245-7021 ext. 2105 by 3:00 PM the business day before; inspections are performed Monday through Thursday.

Source: Belleview application instructions

Apply online: Belleview permit portal

Building Department Contact

Phone: 352-245-7021 ext. 2105
Email: DSStaff@belleviewfl.org
Address: 5525 SE 119th St., Belleview, FL 34420
Hours: Monday to Thursday, 7:00 a.m. to 5:00 p.m. (closed Fridays)
Source: Official contact page

Belleview Permit Fee FAQs

How Much Does a Building Permit Cost in Belleview?

The building permit for a residential remodel runs $166.43, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Belleview's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Belleview?

The roofing permit for a residential re-roof runs $144.10, assuming a 2,000 sq ft roof (the schedule prices per unit), based on Belleview's sourced fee schedule.

How Are Permit Fees Calculated in Belleview?

A residential building permit is $0.81 per square foot. Electrical, Plumbing, and Mechanical / HVAC permits are flat fees; Roofing permits are priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Is the Minimum Permit Fee in Belleview?

The sourced schedule sets a minimum permit fee of $120.00; small jobs pay at least that much before surcharges. The calculator applies it automatically.

What Surcharges Are Added to Permits in Belleview?

On top of the base permit fee, the sourced schedule adds State Building Code Administrators Surcharge (F.S. 468.631) (1.5% of the permit fee, minimum $2.00) and State Building Permit Surcharge (F.S. 553.721) (1% of the permit fee, minimum $2.00). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Belleview?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Belleview Building Division Fee Schedule (Effective July 1, 2026; adopted by Res. 26-03, 7-7-2026). See the official schedule. Last verified September 26, 2026.

Other Jurisdictions in Marion County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Marion CountyBelleviewDunnellon McIntosh Ocala Reddick

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save. Wondering whether fees changed this year? See which Florida fee schedules are new.