FreeEvery fee straight from the official city and county fee schedules. No signup.

Castle Hills, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Castle Hills, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

The fee schedule prints no separate fee for a single HVAC change-out, panel upgrade or repipe; trade estimates use the City's residential square-footage table ($90 minimum). Confirm the fee for a small job with the City.

In Castle Hills, a building permit for a remodel runs $192.50 in permit fees, a $20,000 re-roof $90.00, an HVAC change-out $650.00, an electrical panel upgrade or rewire $650.00, and a whole-house repipe $650.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 200 sq ft job area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Castle Hills Master Fee Schedule (November 2025 posting; Ord. 2024-05-14-B as amended)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at 210-293-9675.

How Castle Hills values a job: Commercial permit fees are based on the project's total market value, including labor and materials; the City may use contractor estimates, invoices, or ICC valuation data, and makes the final determination of value.

Schedule effective May 14, 2024. Last verified: November 20, 2026

Castle Hills Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Castle Hills

Residential (1–2 family): Remodel or improvement
$0.77 per sq ft, minimum $90.00
Residential (1–2 family): New residence, accessory building, or addition
$1.64 per sq ft, minimum $90.00
Residential (1–2 family): Deck
$150.00 flat
Residential (1–2 family): Demolition, residential
$60.00 flat
Residential (1–2 family): Driveway or patio flatwork
$150.00 flat
Residential (1–2 family): Fence or wall, including a wall the local code treats as a fence
$140.00 flat
Residential (1–2 family): Foundation repair
$240.00 flat
Residential (1–2 family): Swimming pool or spa, all segments
$780.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Castle Hills

Homeowners and contractors planning a project check Castle Hills building permit fees here first.

One sponsor per trade, flat monthly rate.

Castle Hills Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

8 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$192.50
Included in this total
Building Permit Fee$154.00
200 sq ft × $0.77 per sq ft
Plan Review Fee$38.50
Total Estimate$192.50
A note on these figures from the official schedule. Details

The fee schedule prints no separate fee for a single HVAC change-out, panel upgrade or repipe; trade estimates use the City's residential square-footage table ($90 minimum). Confirm the fee for a small job with the City.

Estimate only. Confirm with the Castle Hills building department before applying. Phone: 210-293-9675. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Castle Hills

Homeowners and contractors planning a project check Castle Hills building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Castle Hills

Get a permit application from the Castle Hills Permit Office at City Hall, 209 Lemonwood Drive, or download it from the city's permits page.

Email the completed, signed application to permits@castlehills-tx.gov, fax it to 210-342-4525, or bring it to the Permit Office (Monday to Thursday 8:00am to 4:00pm, Friday 8:00am to 3:00pm). There is no online permit portal.

Plans are required for new construction, remodel, accessory and addition permits and must be submitted electronically; plan review takes 10 to 14 business days. A site plan or survey is required for some projects.

Permits must be obtained by the contractor or licensed trade (the master license holder pulls trade permits); a homeowner doing their own work may obtain the permit. Contractors register with the city at no fee.

Fees can be paid by phone with Visa, Mastercard or Discover (5% card fee). Schedule inspections by calling 210-293-9675 by 2:00 pm the business day before (the city's application checklist allows until 3:45 pm).

Source: Castle Hills application instructions

Building Department Contact
Address
209 Lemonwood Drive, Castle Hills, TX 78213
Hours
Monday to Thursday 8:00am to 4:00pm; Friday 8:00am to 3:00pm
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Bexar County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Castle Hills Permit Fee FAQs

How Much Does a Building Permit Cost in Castle Hills?

The building permit for a residential remodel runs $192.50, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Castle Hills's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Castle Hills?

The roofing permit for a $20,000 residential re-roof runs $90.00, based on Castle Hills's sourced fee schedule.

How Are Permit Fees Calculated in Castle Hills?

A residential building permit is $0.77 per sq ft, minimum $90.00. Electrical, Plumbing, and Mechanical / HVAC permits are priced per sq ft; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Castle Hills?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (25% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Castle Hills Master Fee Schedule (November 2025 posting; Ord. 2024-05-14-B as amended). See the official schedule. Last verified .

Other Jurisdictions in Bexar County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.