FreeEvery fee straight from the official city and county fee schedules. No signup.

San Antonio, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for San Antonio, straight from the official fee schedule, with a free permit fee calculator below.

In San Antonio, a building permit for a remodel runs $186.30 in permit fees, a $20,000 re-roof $31.05, an HVAC change-out $69.87, an electrical panel upgrade or rewire $66.14, and a whole-house repipe $192.51. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area, one item, 200 A service, and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

FY 2027 Development Fee Schedule (San Antonio Development Services, revised October 2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the San Antonio permit portal, or call 210-207-1111.

How San Antonio values a job: For commercial remodels and swimming pools the City sets minimum valuations from ICC building valuation data with the Army Corps of Engineers modifier for San Antonio; residential fees are based on project square footage.

Last verified: November 20, 2026

San Antonio Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in San Antonio

Residential (1–2 family): New home, addition, remodel, or accessory structure (by project square footage)
tiered rates by sq ft
Up to 500 sq ft
$172.50
Over 500, up to 1,000 sq ft
$488.80
Over 1,000, up to 1,250 sq ft
$517.50
Over 1,250, up to 1,500 sq ft
$718.80
Over 1,500, up to 1,750 sq ft
$920.00
Over 1,750, up to 2,500 sq ft
$977.50
Over 2,500, up to 3,000 sq ft
$1,012.00
Over 3,000, up to 3,500 sq ft
$1,058.00
Over 3,500, up to 4,000 sq ft
$1,069.50
Over 4,000, up to 5,000 sq ft
$1,150.00
Over 5,000, up to 6,000 sq ft
$1,265.00
Over 6,000, up to 6,500 sq ft
$1,380.00
Over 6,500, up to 7,000 sq ft
$1,610.00
Over 7,000, up to 7,250 sq ft
$1,782.50
Over 7,250, up to 7,500 sq ft
$1,983.80
Over 7,500, up to 7,750 sq ft
$2,185.00
Over 7,750, up to 9,000 sq ft
$2,300.00
Residential (1–2 family): Carport cover or deck
$184.00 flat
Residential (1–2 family): Manufactured home installation
$57.50 flat
Residential (1–2 family): Residential demolition
$86.30 flat
Residential (1–2 family): Residential fence
$28.75 flat
Residential (1–2 family): Residential swimming pool
$414.00 flat
Residential (1–2 family): Unfinished project under 1,000 sq ft (exposed studs, no insulation, no sheetrock)
$172.50 flat
Residential (1–2 family): Foundation repair (existing home)
$184.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in San Antonio

Homeowners and contractors planning a project check San Antonio building permit fees here first.

One sponsor per trade, flat monthly rate.

San Antonio Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

10 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$186.30
Included in this total
Building Permit Fee$172.50
$172.50 flat for up to 500 sq ft (see the fee table above)
Residential Plan Review Fee (Remodel or Addition over 1,000 Sq Ft)$0.00‡
Development Services Surcharge$6.90
Technological Improvement Surcharge$6.90
Total Estimate$186.30

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the San Antonio building department before applying. Apply online. Phone: 210-207-1111. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in San Antonio

Homeowners and contractors planning a project check San Antonio building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in San Antonio

Apply online through the City of San Antonio Development Services Department's BuildSA portal, where you submit applications and plans, pay fees and schedule inspections. Inspections scheduled online carry no scheduling fee; inspections not scheduled online cost $3.45.

Applications that are not submitted online and are processed by staff pay an $11.50 convenience fee, and credit card payments carry a 3% administrative fee.

For a new home, the electrical, mechanical and plumbing permit fees are charged on the building permit. For additions and accessory structures, the licensed trade contractors pull separate electrical, mechanical and plumbing permits linked to the building permit.

In-person help is available at the Cliff Morton Development and Business Services Center (One Stop), 1901 S. Alamo St.

Source: San Antonio application instructions

Apply online: San Antonio permit portal
Building Department Contact
Address
Cliff Morton Development and Business Services Center (One Stop), 1901 S. Alamo St., San Antonio, TX 78204
Hours
Monday - Friday: 7:45 a.m. - 4:30 p.m.
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Bexar County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

San Antonio Permit Fee FAQs

How Much Does a Building Permit Cost in San Antonio?

The building permit for a residential remodel runs $186.30, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from San Antonio's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in San Antonio?

The roofing permit for a $20,000 residential re-roof runs $31.05, based on San Antonio's sourced fee schedule.

How Are Permit Fees Calculated in San Antonio?

A residential building permit is tiered rates by sq ft. Electrical permits are priced per amp; Plumbing permits are priced per fixture; Mechanical / HVAC permits are priced per item; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in San Antonio?

On top of the base permit fee, the sourced schedule adds Development Services Surcharge (4% of the permit fee (4% of the permit fee and the other fees on this estimate)) and Technological Improvement Surcharge (4% of the permit fee (4% of the permit fee and the other fees on this estimate)). These are included in every estimate on this page.

Where Do These Fees Come From?

Every figure on this page is sourced from FY 2027 Development Fee Schedule (San Antonio Development Services, revised October 2026). See the official schedule. Last verified .

Other Jurisdictions in Bexar County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.