FreeEvery fee straight from the official city and county fee schedules. No signup.

Mustang Ridge, TX Permit Fees (2026)

Building, electrical, plumbing, and mechanical/HVAC permit fees for Mustang Ridge, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

Mustang Ridge's posted permit fee ordinance dates from 1998 and no newer building fee schedule was found. Texas law (Local Government Code 214.908) ends a building permit fee ten years after it is adopted unless the City Council reauthorizes it, and no reauthorization was found, so confirm fees with the City at (512) 243-1775 before you apply. The ordinance says permits it does not list start at a minimum of $135.00. Plan review charges from the City's contracted reviewer, septic and gas permits, commercial remodels and reroofs are not included in this estimate.

In Mustang Ridge, a building permit for a remodel runs $135.00 in permit fees, an HVAC change-out $135.00, an electrical panel upgrade or rewire $135.00, and a whole-house repipe $135.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 200 sq ft job area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Mustang Ridge Ordinance No. 98-00158, Amended Permit and Inspection Fee Schedule (Exhibits A-1 and A-2)

Covers building, electrical, plumbing, and mechanical/HVAC permits.

Call the building department at (512) 243-1775.

Last verified: November 20, 2026

Mustang Ridge Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Mustang Ridge

Residential (1–2 family): Remodel, repair or alteration that changes the floor area (by building sq ft)
tiered rates by sq ft‡
Up to 500 sq ft
$135.00
Over 500, up to 1,000 sq ft
$140.00
Over 1,000, up to 1,500 sq ft
$145.00
Over 1,500, up to 2,000 sq ft
$150.00
Over 2,000, up to 2,500 sq ft
$155.00
Over 2,500, up to 3,000 sq ft
$160.00
Over 3,000, up to 3,500 sq ft
$165.00
Over 3,500, up to 4,000 sq ft
$170.00
Over 4,000, up to 4,500 sq ft
$175.00
Over 4,500, up to 5,000 sq ft
$180.00
Over 5,000, up to 6,000 sq ft
$185.00
Over 6,000 sq ft
$185.00 plus $20.00 per additional 500 sq ft
Residential (1–2 family): New single-family home or duplex (site built)
$400.00 flat
Residential (1–2 family): Factory-built home: mobile, modular or single-wide
$200.00 flat
Commercial / 3+ units: New industrial or commercial building
$0.10 per sq ft (total building area)
Commercial / 3+ units: New triplex or quadraplex
$400.00 flat
Permit Reinstatement Fee (if applicable)
$25.00
Reinspection Fee (if applicable)
$60.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Mustang Ridge

Homeowners and contractors planning a project check Mustang Ridge building permit fees here first.

One sponsor per trade, flat monthly rate.

Mustang Ridge Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
sq ft
505,000 sq ft
Estimated building permit fee
$135.00
Building Permit Fee$135.00‡
$135.00 flat for up to 500 sq ft (see the fee table above)
Total Estimate$135.00

‡ Awaiting confirmation from the jurisdiction.

A note on these figures from the official schedule. Details

Mustang Ridge's posted permit fee ordinance dates from 1998 and no newer building fee schedule was found. Texas law (Local Government Code 214.908) ends a building permit fee ten years after it is adopted unless the City Council reauthorizes it, and no reauthorization was found, so confirm fees with the City at (512) 243-1775 before you apply. The ordinance says permits it does not list start at a minimum of $135.00. Plan review charges from the City's contracted reviewer, septic and gas permits, commercial remodels and reroofs are not included in this estimate.

Estimate only. Confirm with the Mustang Ridge building department before applying. Phone: (512) 243-1775. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Mustang Ridge

Homeowners and contractors planning a project check Mustang Ridge building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Mustang Ridge

Download the checklist for your project type (new home, addition or remodel, commercial building, accessory structure, pool, generator, manufactured home) from the Planning and Permitting forms page and ask Planning and Permitting for the permit application; the checklists require a completed, signed application, a written scope of work and one combined digital plan set.

The City's contracted plan reviewer (ATS Engineers, Inspectors & Surveyors) checks the plans; correction comments must be answered in writing with revised plans before approval, and all fees to all agencies must be paid before the permit is approved.

Plans must be approved and all fees paid before construction starts. Contact Evelyn Vega at (512) 243-1775 or evega@mustangridgetx.gov. The City does not list an online permit portal.

Source: Mustang Ridge application instructions

Building Department Contact
Address
12800 Highway 183 South, Mustang Ridge, TX 78610
Hours
Monday - Friday 8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 5:00 p.m.
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Caldwell County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Mustang Ridge Permit Fee FAQs

How Much Does a Building Permit Cost in Mustang Ridge?

The building permit for a residential remodel runs $135.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Mustang Ridge's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Are Permit Fees Calculated in Mustang Ridge?

A residential building permit is tiered rates by sq ft. Electrical, Plumbing, and Mechanical / HVAC permits are priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Mustang Ridge Ordinance No. 98-00158, Amended Permit and Inspection Fee Schedule (Exhibits A-1 and A-2). See the official schedule. Last verified .

Other Jurisdictions in Caldwell County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.