PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Fairview, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Fairview, straight from the official fee schedule, with a free permit fee calculator below.

Building Permit
$305.00
200 sq ft remodel area
Open in calculator
Roofing Permit
$100.00
$20,000 re-roof
Open in calculator
HVAC Permit
$100.00
200 sq ft job area
Open in calculator
Electrical Permit
$100.00
200 sq ft job area
Open in calculator
Plumbing Permit
$100.00
200 sq ft job area
Open in calculator
A note on these figures from the official schedule. Details

Residential electrical, mechanical and plumbing permit fees follow the Town's November 2025 fee ordinance, which prices each trade by the home's square footage; an older $100 per-trade line is still printed in the Town code, so confirm the trade fee with the Town. Fire plan review fees and impact fees are not included.

In Fairview, a building permit for a remodel runs $305.00 in permit fees, a $20,000 re-roof $100.00, an HVAC change-out $100.00, an electrical panel upgrade or rewire $100.00, and a whole-house repipe $100.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 200 sq ft job area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Town of Fairview Building Inspections Department Fee Schedule (Revised December 23, 2025; Code Appendix A as amended by Ord. 2025-23)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Call the building department at 972-886-4209.

How Fairview values a job: Commercial trade permits for occupancy groups not listed in the Town's square-footage tables are priced on the contract valuation of the work.

Last verified: November 14, 2026

Fairview Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Fairview

Residential (1–2 family): Remodel, addition, alteration, repair or fire damage
tiered rates by sq ft ($100 plus $0.65 per sq ft of the whole area from 150 sq ft)‡
Up to 149 sq ft
$100.00
Over 149 sq ft
$196.85 plus $0.65 per additional sq ft
Residential (1–2 family): New single-family home (by sq ft under roof)
tiered rates by sq ft
Up to 1,000 sq ft
$650.00
Over 1,000, up to 1,250 sq ft
$825.00
Over 1,250, up to 1,500 sq ft
$975.00
Over 1,500, up to 1,750 sq ft
$1,150.00
Over 1,750, up to 2,000 sq ft
$1,300.00
Over 2,000, up to 2,250 sq ft
$1,500.00
Over 2,250, up to 2,500 sq ft
$1,700.00
Over 2,500, up to 3,000 sq ft
$1,950.00
Over 3,000, up to 3,500 sq ft
$2,300.00
Over 3,500, up to 4,000 sq ft
$2,600.00
Over 4,000, up to 4,500 sq ft
$2,925.00
Over 4,500 sq ft
$2,950.00 plus $0.65 per additional sq ft
Residential (1–2 family): Detached accessory building (barn, stable, garage, cabana, storage)
tiered rates by sq ft
Up to 250 sq ft
$100.00
Over 250 sq ft
$100.00 plus $0.25 per additional sq ft
Residential (1–2 family): Residential swimming pool, with or without spa
$225.00 flat
Residential (1–2 family): Spa or hot tub only (separate from a pool)
$50.00 flat
Residential (1–2 family): Duplex, townhome, condo or apartment building (attached dwellings; by sq ft under roof)
tiered rates by sq ft
Up to 1,000 sq ft
$650.00
Over 1,000, up to 1,250 sq ft
$825.00
Over 1,250, up to 1,500 sq ft
$975.00
Over 1,500, up to 1,750 sq ft
$1,150.00
Over 1,750, up to 2,000 sq ft
$1,300.00
Over 2,000, up to 2,250 sq ft
$1,500.00
Over 2,250, up to 2,500 sq ft
$1,700.00
Over 2,500, up to 3,000 sq ft
$1,950.00
Over 3,000, up to 3,500 sq ft
$2,300.00
Over 3,500, up to 4,000 sq ft
$2,600.00
Over 4,000, up to 4,500 sq ft
$2,925.00
Over 4,500 sq ft
$2,950.00 plus $0.65 per additional sq ft
Commercial / 3+ units: Commercial new building or remodel (by sq ft)
tiered rates by sq ft, minimum $1,200.00
Up to 10,000 sq ft
$0.78 per sq ft
Over 10,000, up to 50,000 sq ft
$7,800.00 plus $0.65 per additional sq ft
Over 50,000 sq ft
$33,800.00 plus $0.55 per additional sq ft
Commercial / 3+ units: Commercial swimming pool
$500.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Fairview

Homeowners and contractors planning a project check Fairview building permit fees here first.

One sponsor per trade, flat monthly rate.

Fairview Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

6 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$305.00
Included in this total
Building Permit Fee$230.00‡
$196.85 + 51 × $0.65 per sq ft over 149 sq ft (see the fee table above)
$100 plus $0.65 per sq ft of the whole area from 150 sq ft
Plan Review Fee (Remodel, Accessory Building, Pool or Spa)$75.00
Total Estimate$305.00

‡ Awaiting confirmation from the jurisdiction.

A note on these figures from the official schedule. Details

Residential electrical, mechanical and plumbing permit fees follow the Town's November 2025 fee ordinance, which prices each trade by the home's square footage; an older $100 per-trade line is still printed in the Town code, so confirm the trade fee with the Town. Fire plan review fees and impact fees are not included.

Estimate only. Confirm with the Fairview building department before applying. Phone: 972-886-4209. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Fairview

Homeowners and contractors planning a project check Fairview building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Fairview

Fairview's Building Inspections Department issues building, electrical, plumbing, mechanical and roofing permits inside the town limits. The permitting desk at Town Hall, 372 Town Place, is open to the public for walk-ins, and the Town also accepts permit applications by email to permits@fairviewtexas.org, by mail, and in the black drop box on the east side of the building by the curb. Plan submittals need two 11 x 17 sets and a flash drive; plans submitted without them are denied without review. Request inspections by calling (972) 886-4250 or emailing permits@fairviewtexas.org before 4:00 p.m. for next-day inspection; inspections are conducted between 8:30 a.m. and 4:00 p.m. and results are left at the jobsite.

Source: Fairview application instructions

Building Department Contact
Inspection line
972-886-4250
Address
372 Town Place, Fairview, TX 75069
Hours
Monday to Friday, 8:00 a.m. to 4:30 p.m. (Town Hall)
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Collin County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Fairview Permit Fee FAQs

How Much Does a Building Permit Cost in Fairview?

The building permit for a residential remodel runs $305.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Fairview's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Fairview?

The roofing permit for a $20,000 residential re-roof runs $100.00, based on Fairview's sourced fee schedule.

How Are Permit Fees Calculated in Fairview?

A residential building permit is tiered rates by sq ft ($100 plus $0.65 per sq ft of the whole area from 150 sq ft). Electrical, Plumbing, and Mechanical / HVAC permits are priced per sq ft; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Fairview?

On top of the base permit fee, the sourced schedule adds Commercial Plan Review Fee (10% of the permit fee) and Plan Review Fee (Duplex, Townhome, Condo or Apartment) (10% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Town of Fairview Building Inspections Department Fee Schedule (Revised December 23, 2025; Code Appendix A as amended by Ord. 2025-23). See the official schedule. Last verified .

Other Jurisdictions in Collin County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Collin CountyAllenAnnaCelinaFairviewFarmersvilleFriscoJosephineLavonLowry CrossingLucasMurphyNevadaNew HopeParkerPlanoPrincetonProsperSt. PaulWylie
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.