Cedar Hill, TX Permit Fees (2026)
Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Cedar Hill, straight from the official fee schedule, with a free permit fee calculator below.
In Cedar Hill, a building permit for a remodel runs $120.00 in permit fees, a $20,000 re-roof $100.00, a $10,000 HVAC change-out $75.00, a $10,000 electrical panel upgrade or rewire $75.00, and a $10,000 whole-house repipe $75.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.
Jump to Permit Fee CalculatorCity of Cedar Hill Ordinance No. 2023-794, Building Permit Fee Schedule (Code of Ordinances Chapter 4, Article I, Section 4-1; adopted October 10, 2023)
Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.
Apply online at the Cedar Hill permit portal, or call 972-291-5100.
Last verified: November 3, 2026
Cedar Hill Permit Fee Schedule
Every documented rule for each permit type, straight from the official schedule.
Mechanical / HVAC Permit Fees in Cedar Hill
† Corroborated across official sources, but not printed line-for-line in the linked schedule.
Homeowners and contractors planning a project check Cedar Hill mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.
Advertise on This PageCedar Hill Permit Fee Calculator
Pick a permit type and adjust the job value. Total updates instantly, itemized below.
Estimate only. Confirm with the Cedar Hill building department before applying. Apply online. Phone: 972-291-5100. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.
Homeowners and contractors planning a project check Cedar Hill mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.
Advertise on This PageHow to Apply for a Permit in Cedar Hill
Apply for building, trade, roofing, fence, pool and other construction permits online through the City of Cedar Hill EnerGov Customer Self Service portal: register for an account (contractors must apply online through the portal), choose the permit type, complete the building permit application with the value of work and the square footage (living area, garage, porch, total), and upload plans. New homes need a full plan set (floor, elevation, foundation, framing, plot plan, energy review, soils report and engineered foundation, engineered drainage plan); commercial projects need site, utility, architectural, structural and trade plans plus ComCheck, and pay the plan review fee (65% of the commercial permit fee) when applying. New commercial structures need site plan approval from the Planning and Zoning Commission and City Council first. Pay fees and schedule inspections in the portal; request inspections by 4:00 pm the day before (portal, cityinspections@cedarhilltx.com, or 972-291-5100 ext. 1093). General contractors register with the city every year ($100 a year); state-licensed electrical, plumbing, mechanical and irrigation contractors also register every year, at no fee.
Source: Cedar Hill application instructions
Apply online: Cedar Hill permit portal- Phone
- 972-291-5100 ext. 1090
- Address
- Government Center, 285 Uptown Boulevard, Cedar Hill, TX 75104
- Hours
- Monday through Friday, 8 a.m. to 5 p.m.
- Source
- Official contact page
Cedar Hill Permit Fee FAQs
How Much Does a Building Permit Cost in Cedar Hill?
How Much Does a Roofing Permit Cost in Cedar Hill?
How Are Permit Fees Calculated in Cedar Hill?
What Surcharges Are Added to Permits in Cedar Hill?
Where Do These Fees Come From?
Other Jurisdictions in Dallas County
Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.