Highland Park, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Highland Park, straight from the official fee schedule, with a free permit fee calculator below.

In Highland Park, a building permit for a remodel runs $514.00 in permit fees, a $20,000 re-roof $198.00, an HVAC change-out $55.00, an electrical panel upgrade or rewire $154.00, and a whole-house repipe $165.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area, a 200 sq ft job area, 10 altered circuits, and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator

Source

Town of Highland Park Master Fee Schedule FY 2026-27 (Resolution 017-26, effective October 1, 2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits. Minimum permit fee: $55.00.

Official Fee Schedule

Apply online at the Highland Park permit portal, or call 214-559-9409.

Schedule effective October 1, 2026. Last verified: November 3, 2026

Highland Park Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Highland Park

Residential (1–2 family): Residential new or renovation HVAC

$0.088 per sq ft (air-conditioned area), minimum $55.00

Commercial / 3+ units: Commercial HVAC work (1.1% of value)

1.1% of job value

Plan Review Fee (up to 3 reviews)

$250.00‡

Additional Plan Review (each, after 3 reviews) (if applicable)

$125.00

After-Hours or Emergency Inspection (if applicable)

$300.00

Reinspection Fee (each after the first reinspection) (if applicable)

$75.00‡

Revisions After Plan Approval (each) (if applicable)

$250.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page

Be the Featured HVAC Company in Highland Park

Homeowners and contractors planning a project check Highland Park mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Highland Park Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type

Project type

Kind of work

Sq ft (air-conditioned area)

sq ft

505,000 sq ft

Estimated mechanical / HVAC permit fee

$55.00

Included in this total

Mechanical / HVAC Permit Fee$17.60

200 sq ft (air-conditioned area) × $0.088 per sq ft (air-conditioned area)

Minimum Permit Fee Adjustment$37.40

Minimum permit fee: $55.00

Total Estimate$55.00

Estimate only. Confirm with the Highland Park building department before applying. Apply online. Phone: 214-559-9409. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page

Be the Featured HVAC Company in Highland Park

Homeowners and contractors planning a project check Highland Park mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Highland Park

Register your company with the Town's contractor registration program, then apply for permits, pay fees, and request inspections online through the Town's OpenGov permit portal. The Department of Building Inspection takes permit applications and plan review by digital submittal; when plans are required, upload them with the online application. Inspection requests must be received by 4:00 PM for the next business day. Fees can also be paid by check at Town Hall, 4700 Drexel Drive. General contractors and roofing, pool, fence, concrete, demolition, drainage, irrigation, landscape and sign contractors pay a $125 annual registration; plumbing, electrical and mechanical contractors register at no charge.

Source: Highland Park application instructions

Apply online: Highland Park permit portal

Building Department Contact

Phone: 214-559-9409
Address: 4700 Drexel Drive, Highland Park, TX 75205
Hours: Monday to Friday, 7:30 AM to 4:30 PM
Source: Official contact page

Highland Park Permit Fee FAQs

How Much Does a Building Permit Cost in Highland Park?

The building permit for a residential remodel runs $514.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Highland Park's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Highland Park?

The roofing permit for a $20,000 residential re-roof runs $198.00, based on Highland Park's sourced fee schedule.

How Are Permit Fees Calculated in Highland Park?

A residential building permit is $1.32 per sq ft (addition or remodel area). Electrical permits are priced per circuit; Plumbing permits are priced per fixture; Mechanical / HVAC permits are priced per sq ft; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Is the Minimum Permit Fee in Highland Park?

The sourced schedule sets a minimum permit fee of $55.00; small jobs pay at least that much before surcharges. The calculator applies it automatically.

Where Do These Fees Come From?

Every figure on this page is sourced from Town of Highland Park Master Fee Schedule FY 2026-27 (Resolution 017-26, effective October 1, 2026). See the official schedule. Last verified November 3, 2026.

Other Jurisdictions in Dallas County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.