PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Seagoville, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Seagoville, straight from the official fee schedule, with a free permit fee calculator below.

Commercial and commercial trade estimates stop at $1,000,000 of job value because the City's commercial fee table prints overlapping ranges above that amount; ask the Building Department about larger jobs. Work started before a permit is obtained pays double the permit fee.

Building Permit
$175.00
200 sq ft remodel area
Open in calculator
Roofing Permit
$100.00
$20,000 re-roof
Open in calculator
HVAC Permit
$100.00
$10,000 change-out
Open in calculator
Electrical Permit
$100.00
$10,000 panel or rewire
Open in calculator
Plumbing Permit
$100.00
$10,000 repipe
Open in calculator

In Seagoville, a building permit for a remodel runs $175.00 in permit fees, a $20,000 re-roof $100.00, a $10,000 HVAC change-out $100.00, a $10,000 electrical panel upgrade or rewire $100.00, and a $10,000 whole-house repipe $100.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Seagoville Master Fee Schedule FY 2026-2027 (Exhibit A to Resolution 2026-77, effective October 1, 2026), in the September 14, 2026 City Council agenda packet

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Apply online at the Seagoville permit portal, or call 972-287-6829.

Schedule effective October 1, 2026. Last verified: November 3, 2026

Seagoville Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Seagoville

Residential (1–2 family): Residential heating, cooling, or ventilation work of any kind
$75.00 flat
Commercial / 3+ units: Commercial mechanical permit (Table 1A valuation)
tiered rates by job value, minimum $75.00
Bands above $25,000 use printed bases that start $5.75 below the first band
Up to $2,000
$75.00
Over $2,000, up to $25,000
$75.00 plus $14.00 per additional $1,000
Over $25,000, up to $50,000
$391.25 plus $10.10 per additional $1,000
Over $50,000, up to $100,000
$643.75 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$993.75 plus $5.60 per additional $1,000
Over $500,000, up to $1,000,000
$3,233.75 plus $4.75 per additional $1,000
Administrative Fee
$25.00‡
Plan Review Fee (Commercial and Multifamily Trade Permits)
40% of the permit fee‡
Additional Plan Review (Commercial and Multifamily, after 2nd review) (if applicable)
$200.00
Additional Plan Review (Residential, after 2nd review) (if applicable)
$50.00
After-Hours Inspection (if applicable)
$50.00 per hour, minimum $100.00
Red Tag Re-inspection Fee (if applicable)
$50.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured HVAC Company in Seagoville

Homeowners and contractors planning a project check Seagoville mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Seagoville Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work

Fees in Seagoville are the same either way.

Estimated mechanical / HVAC permit fee
$100.00
Included in this total
Mechanical / HVAC Permit Fee$75.00
$75.00 flat
Administrative Fee$25.00‡
Total Estimate$100.00

‡ Awaiting confirmation from the jurisdiction.

Commercial and commercial trade estimates stop at $1,000,000 of job value because the City's commercial fee table prints overlapping ranges above that amount; ask the Building Department about larger jobs. Work started before a permit is obtained pays double the permit fee.

Estimate only. Confirm with the Seagoville building department before applying. Apply online. Phone: 972-287-6829. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured HVAC Company in Seagoville

Homeowners and contractors planning a project check Seagoville mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Seagoville

Apply for building, electrical, plumbing and HVAC permits, contractor registration and certificates of occupancy through the City of Seagoville Permit Portal; the Permitting Department processes applications and issues permits. For permitting questions call the Permit Technician at 972-287-6833 or email mbrown@seagoville.us. Request inspections through the Permit Portal or by calling the inspections line at 972-287-6829. Certificate of occupancy application forms are also available at Seagoville City Hall, 702 North Highway 175.

Source: Seagoville application instructions

Apply online: Seagoville permit portal
Building Department Contact
Address
702 North Highway 175, Seagoville, TX 75159
Hours
Monday through Thursday, 7:30 am to 5:30 pm

Seagoville Permit Fee FAQs

How Much Does a Building Permit Cost in Seagoville?

The building permit for a residential remodel runs $175.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Seagoville's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Seagoville?

The roofing permit for a $20,000 residential re-roof runs $100.00, based on Seagoville's sourced fee schedule.

How Are Permit Fees Calculated in Seagoville?

A residential building permit is $0.75 per sq ft. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Seagoville?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (Commercial and Multifamily Trade Permits) (40% of the permit fee) and Plan Review Fee (Commercial and Multifamily) (40% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Seagoville Master Fee Schedule FY 2026-2027 (Exhibit A to Resolution 2026-77, effective October 1, 2026), in the September 14, 2026 City Council agenda packet. See the official schedule. Last verified .

Other Jurisdictions in Dallas County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Dallas CountyAddisonBalch SpringsCedar HillCockrell HillCoppellDallasDeSotoDuncanvilleFarmers BranchGarlandGlenn HeightsGrand PrairieHighland ParkHutchinsIrvingLancasterMesquiteRichardsonRowlettSachseSeagovilleSunnyvaleUniversity ParkWilmer
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.