FreeEvery fee straight from the official city and county fee schedules. No signup.

Hilshire Village, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Hilshire Village, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

The city doubles the permit fee when work is started before a permit is obtained; estimates here do not include that charge. Hourly plan review and revision charges, stop work order fees and the city's sign, dumpster, tree and plat fees are also not included.

In Hilshire Village, a building permit for a remodel runs $480.00 in permit fees, a $20,000 re-roof $240.00, a $10,000 HVAC change-out $160.00, a $10,000 electrical panel upgrade or rewire $330.00, and a $10,000 whole-house repipe $180.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Hilshire Village Code of Ordinances, Appendix A Fee Schedule, Article 3.000 Building Related Fees (Exhibit A, Ord. 808-2021, approved June 15, 2021)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at 713-973-1779.

How Hilshire Village values a job: Commercial building permit fees are based on the total construction valuation, which must be within 10% of the most recent ICC Building Valuation Data.

Last verified: November 21, 2026

Hilshire Village Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Hilshire Village

Residential (1–2 family): Remodel of a home, room or area
$1.51 per sq ft, minimum $320.00
Residential (1–2 family): New home
$1.31 per sq ft‡
Residential (1–2 family): Accessory building over 200 sq ft
$400.00 flat
Residential (1–2 family): Carport
$320.00 flat
Residential (1–2 family): Culvert
$205.00 flat
Residential (1–2 family): Demolition
$330.00 flat
Residential (1–2 family): Fence, non-masonry
$175.00 flat
Residential (1–2 family): Flatwork over 200 sq ft
$380.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Hilshire Village

Homeowners and contractors planning a project check Hilshire Village building permit fees here first.

One sponsor per trade, flat monthly rate.

Hilshire Village Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

16 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$480.00
Included in this total
Building Permit Fee$302.00
200 sq ft × $1.51 per sq ft
Minimum Permit Fee Adjustment$18.00
Minimum permit fee: $320.00
Plan Review Fee (Residential)$160.00‡
Total Estimate$480.00

‡ Awaiting confirmation from the jurisdiction.

A note on these figures from the official schedule. Details

The city doubles the permit fee when work is started before a permit is obtained; estimates here do not include that charge. Hourly plan review and revision charges, stop work order fees and the city's sign, dumpster, tree and plat fees are also not included.

Estimate only. Confirm with the Hilshire Village building department before applying. Phone: 713-973-1779. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Hilshire Village

Homeowners and contractors planning a project check Hilshire Village building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Hilshire Village

Email the completed General Permit Application and the City's Rules and Regulations form (both linked on the city's Building Permits page) to Lisa Ray at lisa.ray@hilshirevillagetexas.com, with a copy of your liability insurance certificate naming the City of Hilshire Village as Certificate Holder. Fence, tree removal and portable storage container or 30-day dumpster permits use their own application forms on the same page. If you hold a trade license, also send a copy of the license and the master's state-issued ID. Pay by 3 PM to receive the permit the same day; payment is made online through the city's payment link or at City Hall by cash or check, and permits are issued by email once processed. To request an inspection, email Lisa Ray by 3 PM with the permit number, job site address, specific inspection requested, requested date, and a contact name and phone number. City Hall phone: 713-973-1779.

Source: Hilshire Village application instructions

Building Department Contact
Address
8301 Westview Drive, Houston, TX 77055
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Harris County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Hilshire Village Permit Fee FAQs

How Much Does a Building Permit Cost in Hilshire Village?

The building permit for a residential remodel runs $480.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Hilshire Village's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Hilshire Village?

The roofing permit for a $20,000 residential re-roof runs $240.00, based on Hilshire Village's sourced fee schedule.

How Are Permit Fees Calculated in Hilshire Village?

A residential building permit is $1.51 per sq ft, minimum $320.00. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Hilshire Village?

On top of the base permit fee, the sourced schedule adds Plan review fee (commercial) (65% of the permit fee) and Plan review fee (residential) (50% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Hilshire Village Code of Ordinances, Appendix A Fee Schedule, Article 3.000 Building Related Fees (Exhibit A, Ord. 808-2021, approved June 15, 2021). See the official schedule. Last verified .

Other Jurisdictions in Harris County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.