FreeEvery fee straight from the official city and county fee schedules. No signup.

Hardin, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, and roofing permit fees for Hardin, straight from the official fee schedule, with a free permit fee calculator below.

Hardin's fee ordinance (Ordinance 2021-1108) is not posted online, so these estimates use the fees printed on the City's current permit application forms. Commercial new construction uses the application's $0.40 per sq ft with a $200 minimum; the City's Permit Manual prints $0.30 per sq ft with a $400 minimum, so confirm with City Hall at (936) 298-2117. Sewer tap and connection charges and driveway or culvert permits are separate.

In Hardin, a building permit for a remodel runs $50.00 in permit fees, a re-roof $400.00, and a $10,000 electrical panel upgrade or rewire $50.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 2,000 sq ft roof. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Hardin permit application forms (Building Permit Application p. 2, Electrical Permit Application, Manufactured Home Permit Application p. 2, Wastewater Permit Application p. 1), citing Ordinance 2021-1108 Fee Schedule

Covers building, electrical, plumbing, and roofing permits.

Call the building department at (936) 298-2117.

Last verified: November 3, 2026

Hardin Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Electrical Permit Fees in Hardin

Electrical permit
$50.00 flat†

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

Sponsor This Page
Be the Featured Electrician in Hardin

Homeowners and contractors planning a project check Hardin electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Hardin Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Estimated electrical permit fee
$50.00
Electrical Permit Fee$50.00
$50.00 flat
Total Estimate$50.00

Hardin's fee ordinance (Ordinance 2021-1108) is not posted online, so these estimates use the fees printed on the City's current permit application forms. Commercial new construction uses the application's $0.40 per sq ft with a $200 minimum; the City's Permit Manual prints $0.30 per sq ft with a $400 minimum, so confirm with City Hall at (936) 298-2117. Sewer tap and connection charges and driveway or culvert permits are separate.

Estimate only. Confirm with the Hardin building department before applying. Phone: (936) 298-2117. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured Electrician in Hardin

Homeowners and contractors planning a project check Hardin electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Hardin

Download the permit application from the City's Permits and Inspections page (building, electrical, manufactured home or wastewater permit), fill it out, and return it to City Hall at 142 CR 2010, Liberty, TX 77575 with a copy of the deed of record, building plans, and the contractor's State of Texas license and insurance; fees are paid at submittal. Contractors must also register with the City each year. The City has no online permit portal. Inspections are scheduled by calling City Hall 24 hours in advance, and you must give the City a copy of your inspection reports. Shingle-only reroofs need no permit.

Source: Hardin application instructions

Building Department Contact
Address
142 CR 2010, Liberty, TX 77575
Hours
Monday to Thursday 8:00 a.m. to 5:00 p.m.; Friday 10:00 a.m. to 5:00 p.m.
Source
https://www.hardintexas.com/permits-and-inspections ; https://www.hardintexas.com/city-hall ; https://www.hardintexas.com/city-secretary

Hardin Permit Fee FAQs

How Much Does a Building Permit Cost in Hardin?

The building permit for a residential remodel runs $50.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Hardin's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Hardin?

The roofing permit for a residential re-roof runs $400.00, assuming a 2,000 sq ft roof (the schedule prices per unit), based on Hardin's sourced fee schedule.

How Are Permit Fees Calculated in Hardin?

A residential building permit is $0.20 per sq ft, minimum $50.00. Electrical permits are flat fees; Roofing permits are priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Hardin permit application forms (Building Permit Application p. 2, Electrical Permit Application, Manufactured Home Permit Application p. 2, Wastewater Permit Application p. 1), citing Ordinance 2021-1108 Fee Schedule. See the official schedule. Last verified .

Other Jurisdictions in Liberty County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.