FreeEvery fee straight from the official city and county fee schedules. No signup.

Oak Ridge North, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Oak Ridge North, straight from the official fee schedule, with a free permit fee calculator below.

Oak Ridge North's posted fee schedule is dated September 28, 2026 (Resolution 2026-07). Its printed commercial valuation bands do not join at the band edges (for example $740 at $50,000 but $558 at $50,001), so confirm commercial and non-dwelling fees with the Building Department.

In Oak Ridge North, a building permit for a remodel runs $244.00 in permit fees, a $20,000 re-roof $77.00, a $10,000 HVAC change-out $165.00, an electrical panel upgrade or rewire $77.00, and a whole-house repipe $92.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and 2 county-assigned inspections. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Oak Ridge North Schedule of Fees (Exhibit A to Resolution 2026-07, dated September 28, 2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at (832) 381-3301.

How Oak Ridge North values a job: Commercial and non-dwelling permits are priced on project valuation: new buildings and additions from the latest ICC Building Valuation Data table, alterations and build-outs from the project valuation, or as the building official determines. Homes are priced per square foot of building or work area.

Last verified: November 3, 2026

Oak Ridge North Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Oak Ridge North

Residential (1–2 family): Complete HVAC change-out or new system
$165.00 flat
Residential (1–2 family): Duct work change-out or equipment change-out
$77.00 flat
Commercial / 3+ units: Commercial heating and cooling, A/C central unit
$50.00 for the first 3 tons (A/C capacity), plus $12.50 per ton (A/C capacity) or fraction thereof
Commercial / 3+ units: Commercial kitchen hood
$180.00 per hood (commercial kitchen)
Commercial / 3+ units: Commercial or industrial refrigeration
$115.00 per system (cooler or refrigeration system)
Boiler installation, repair, or replacement
$115.00 per boiler
Commercial HVAC Inspection Fee (select fee rules only)
$65.00 per inspection
After-Hours Inspection, Weekdays (if applicable)
$150.00
Expired Permit Renewal (if applicable)
50% of the permit fee (One-half of the original permit fee)
Inspection on Weekends or City Holidays (if applicable)
$300.00
Reinspection Fee (if applicable)
$65.00
Sponsor This Page
Be the Featured HVAC Company in Oak Ridge North

Homeowners and contractors planning a project check Oak Ridge North mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Oak Ridge North Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

Estimated mechanical / HVAC permit fee
$165.00
Mechanical / HVAC Permit Fee$165.00
$165.00 flat
Total Estimate$165.00

Oak Ridge North's posted fee schedule is dated September 28, 2026 (Resolution 2026-07). Its printed commercial valuation bands do not join at the band edges (for example $740 at $50,000 but $558 at $50,001), so confirm commercial and non-dwelling fees with the Building Department.

Estimate only. Confirm with the Oak Ridge North building department before applying. Phone: (832) 381-3301. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured HVAC Company in Oak Ridge North

Homeowners and contractors planning a project check Oak Ridge North mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Oak Ridge North

Download the application for your project from the City's Permits and Zoning page and email the completed application, drawings, specifications and plan review fees to permits@oakridgenorth.com, or deliver a PDF copy to the permit office at City Hall, 27424 Robinson Road. All contractors must register with the City before working in the city limits. For commercial buildings and residential accessory structures, the plan review fee (one-half of the permit fee) is due when you submit and the remaining fees are due when the permit is issued. Plan review for permits that need drawings typically takes about 10 days; permits that do not need drawings are usually issued the same day. Commercial projects valued at $50,000 or more must also be registered with the Texas Department of Licensing and Regulation (Architectural Barriers). Call for inspections at least 24 hours ahead at (832) 381-3298 or inspections@oakridgenorth.com. Questions: (832) 381-3301.

Source: Oak Ridge North application instructions

Building Department Contact
Inspection Line
(832) 381-3298 or inspections@oakridgenorth.com
Address
27424 Robinson Road, Oak Ridge North, TX 77385

Oak Ridge North Permit Fee FAQs

How Much Does a Building Permit Cost in Oak Ridge North?

The building permit for a residential remodel runs $244.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Oak Ridge North's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Oak Ridge North?

The roofing permit for a $20,000 residential re-roof runs $77.00, based on Oak Ridge North's sourced fee schedule.

How Are Permit Fees Calculated in Oak Ridge North?

A residential building permit is $0.72 per sq ft (building or work area). Electrical and Plumbing permits are priced per inspection; Mechanical / HVAC and Roofing permits are flat fees. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Oak Ridge North?

On top of the base permit fee, the sourced schedule adds Plan Checking Fee (50% of the permit fee, jobs over $1,000 only (One-half of the building permit fee, paid at plan submittal)). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Oak Ridge North Schedule of Fees (Exhibit A to Resolution 2026-07, dated September 28, 2026). See the official schedule. Last verified .

Other Jurisdictions in Montgomery County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.