PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Hurst, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Hurst, straight from the official fee schedule, with a free permit fee calculator below.

Building Permit
$160.00
200 sq ft remodel area
Open in calculator
Roofing Permit
$60.00
$20,000 re-roof
Open in calculator
HVAC Permit
$60.00
$10,000 change-out
Open in calculator
Electrical Permit
$60.00
$10,000 panel or rewire
Open in calculator
Plumbing Permit
$60.00
$10,000 repipe
Open in calculator

In Hurst, a building permit for a remodel runs $160.00 in permit fees, a $20,000 re-roof $60.00, a $10,000 HVAC change-out $60.00, a $10,000 electrical panel upgrade or rewire $60.00, and a $10,000 whole-house repipe $60.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Hurst Building Permit Fees (Oct. 2020) and Building Permit Fee Schedule (effective May 28, 2019)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Apply online at the Hurst permit portal, or call 817-788-7088.

Schedule effective May 28, 2019. Last verified: November 3, 2026

Hurst Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Hurst

Residential (1–2 family): Remodel at a home
$0.80 per sq ft under roof
Residential (1–2 family): New home
$1.00 per sq ft under roof
Residential (1–2 family): Above-ground swimming pool at a home
$75.00 flat
Residential (1–2 family): Accessory structure open on three sides
$75.00 flat
Residential (1–2 family): Demolition at a home (valuation table)
tiered rates by job value
The schedule prints a $6,011.75 base over $1,000,000 where the band below reaches $6,511.75; each band is charged as printed.
Up to $500
$50.00
Over $500, up to $2,000
$50.00 plus $3.23 per additional $100
Over $2,000, up to $25,000
$98.45 plus $16.10 per additional $1,000
Over $25,000, up to $50,000
$468.75 plus $11.62 per additional $1,000
Over $50,000, up to $100,000
$759.25 plus $8.05 per additional $1,000
Over $100,000, up to $500,000
$1,161.75 plus $6.50 per additional $1,000
Over $500,000, up to $1,000,000
$3,761.75 plus $5.50 per additional $1,000
Over $1,000,000
$6,011.75 plus $4.50 per additional $1,000
Residential (1–2 family): Driveway approach at a home
$75.00 flat
Residential (1–2 family): Fence at a home
$100.00 flat
Residential (1–2 family): Flatwork paving at a home
$60.00 flat
Residential (1–2 family): Foundation work at a home, engineering report with piers required (valuation table)
tiered rates by job value
The schedule prints a $6,011.75 base over $1,000,000 where the band below reaches $6,511.75; each band is charged as printed.
Up to $500
$50.00
Over $500, up to $2,000
$50.00 plus $3.23 per additional $100
Over $2,000, up to $25,000
$98.45 plus $16.10 per additional $1,000
Over $25,000, up to $50,000
$468.75 plus $11.62 per additional $1,000
Over $50,000, up to $100,000
$759.25 plus $8.05 per additional $1,000
Over $100,000, up to $500,000
$1,161.75 plus $6.50 per additional $1,000
Over $500,000, up to $1,000,000
$3,761.75 plus $5.50 per additional $1,000
Over $1,000,000
$6,011.75 plus $4.50 per additional $1,000
Residential (1–2 family): Permanent accessory building
tiered rates by sq ft
Up to 200 sq ft
$100.00
Over 200 sq ft
$350.00
Residential (1–2 family): Portable accessory building, 121 to 200 sq ft
$75.00 flat
Residential (1–2 family): Retaining wall at a home (valuation table)
tiered rates by job value
The schedule prints a $6,011.75 base over $1,000,000 where the band below reaches $6,511.75; each band is charged as printed.
Up to $500
$50.00
Over $500, up to $2,000
$50.00 plus $3.23 per additional $100
Over $2,000, up to $25,000
$98.45 plus $16.10 per additional $1,000
Over $25,000, up to $50,000
$468.75 plus $11.62 per additional $1,000
Over $50,000, up to $100,000
$759.25 plus $8.05 per additional $1,000
Over $100,000, up to $500,000
$1,161.75 plus $6.50 per additional $1,000
Over $500,000, up to $1,000,000
$3,761.75 plus $5.50 per additional $1,000
Over $1,000,000
$6,011.75 plus $4.50 per additional $1,000
Residential (1–2 family): Addition to a home
$1.00 per sq ft under roof
Commercial / 3+ units: Commercial new building, addition, remodel or tenant finish-out (valuation table)
tiered rates by job value
The schedule prints a $6,011.75 base over $1,000,000 where the band below reaches $6,511.75; each band is charged as printed.
Up to $500
$50.00
Over $500, up to $2,000
$50.00 plus $3.23 per additional $100
Over $2,000, up to $25,000
$98.45 plus $16.10 per additional $1,000
Over $25,000, up to $50,000
$468.75 plus $11.62 per additional $1,000
Over $50,000, up to $100,000
$759.25 plus $8.05 per additional $1,000
Over $100,000, up to $500,000
$1,161.75 plus $6.50 per additional $1,000
Over $500,000, up to $1,000,000
$3,761.75 plus $5.50 per additional $1,000
Over $1,000,000
$6,011.75 plus $4.50 per additional $1,000
In-ground swimming pool
$500.00 flat
Plan Review Fee (Commercial) (select fee rules only)
65% of the permit fee
Pool Electrical Fee (select fee rules only)
$60.00‡
Public Works Flatwork Permit (select fee rules only)
$100.00‡
Certificate of Occupancy (if applicable)
$60.00
Construction Trailer Permit (if applicable)
$60.00
Temporary Storage (per unit) (if applicable)
$150.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Hurst

Homeowners and contractors planning a project check Hurst building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Hurst Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

13 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$160.00
Building Permit Fee$160.00
200 sq ft under roof × $0.80 per sq ft under roof
Total Estimate$160.00

Estimate only. Confirm with the Hurst building department before applying. Apply online. Phone: 817-788-7088. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Hurst

Homeowners and contractors planning a project check Hurst building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Hurst

Apply for building, trade and other construction permits online through the City of Hurst Citizen Self-Service (CSS) permit portal. Create an account using your company name and company email, not an individual person. Submit plans and all required documents in PDF format; contractors register on each permit application by uploading a U.S. issued ID, trade license (if applicable) and certificate of liability insurance. Fees are invoiced and emailed to you for payment through your account (credit card or e-check). Inspections are requested through the same portal.

Source: Hurst application instructions

Apply online: Hurst permit portal
Building Department Contact
Address
1505 Precinct Line Road, Hurst, Texas 76054

Hurst Permit Fee FAQs

How Much Does a Building Permit Cost in Hurst?

The building permit for a residential remodel runs $160.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Hurst's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Hurst?

The roofing permit for a $20,000 residential re-roof runs $60.00, based on Hurst's sourced fee schedule.

How Are Permit Fees Calculated in Hurst?

A residential building permit is $0.80 per sq ft under roof. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Hurst?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (Commercial) (65% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Hurst Building Permit Fees (Oct. 2020) and Building Permit Fee Schedule (effective May 28, 2019). See the official schedule. Last verified .

Other Jurisdictions in Tarrant County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Tarrant CountyArlingtonAzleBedfordBenbrookColleyvilleCrowleyEulessFort WorthGrapevineHaltom CityHurstKellerKennedaleMansfieldNorth Richland HillsRichland HillsSaginawSouthlakeWataugaWhite Settlement
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.