FreeEvery fee straight from the official city and county fee schedules. No signup.

Rollingwood, TX Permit Fees (2026)

Building, electrical, plumbing, and mechanical/HVAC permit fees for Rollingwood, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

Rollingwood's fee schedule prints no roofing permit fee, so reroofs are not estimated here, and it does not say whether stand-alone electrical, plumbing or mechanical permits also pay the $0.25 per square foot area charge. Estimates include one $75 inspection; the city sets the number of required inspections at plan review and all are prepaid. Call Development Services at (512) 327-1838.

In Rollingwood, a building permit for a remodel runs $360.00 in permit fees, an HVAC change-out $210.00, an electrical panel upgrade or rewire $210.00, and a whole-house repipe $210.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 200 sq ft job area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Rollingwood Fee Schedule (Appendix A), posted copy headed 'Amended September 17, 2025' (Res. No. 2025-09-17-32, adopted 9/17/2025)

Covers building, electrical, plumbing, and mechanical/HVAC permits.

Apply online at the Rollingwood permit portal, or call (512) 327-1838.

Schedule effective September 17, 2025. Last verified: November 20, 2026

Rollingwood Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Rollingwood

Residential (1–2 family): Remodel
$225.00 base, plus $0.25 per sq ft (project area)
Residential (1–2 family): New home or reconstruction
$600.00 base, plus $0.25 per sq ft (project area)
Residential (1–2 family): Accessory building of 200 to 500 sq ft
$225.00 base, plus $0.25 per sq ft (project area)
Residential (1–2 family): Addition that increases the footprint or roof plan, such as a second story
$600.00 base, plus $0.25 per sq ft (project area)
Residential (1–2 family): Addition with no increase in footprint or roof plan
$225.00 base, plus $0.25 per sq ft (project area)
Residential (1–2 family): Bedroom emergency egress window installation
$75.00 flat
Residential (1–2 family): Swimming pool added to a home
$600.00 base, plus $0.25 per sq ft (project area)
Commercial / 3+ units: Commercial addition, remodel or finish out
$600.00 base, plus $0.25 per sq ft (project area)

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Rollingwood

Homeowners and contractors planning a project check Rollingwood building permit fees here first.

One sponsor per trade, flat monthly rate.

Rollingwood Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

10 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$360.00
Included in this total
Building Permit Fee$275.00
$225.00 base + 200 sq ft × $0.25 per sq ft
Application Filing Fee (MGO, Technology and GIS)$10.00
Inspection Fee$75.00
Assumes 1 inspection; the building department sets the actual count for your project.
Total Estimate$360.00
A note on these figures from the official schedule. Details

Rollingwood's fee schedule prints no roofing permit fee, so reroofs are not estimated here, and it does not say whether stand-alone electrical, plumbing or mechanical permits also pay the $0.25 per square foot area charge. Estimates include one $75 inspection; the city sets the number of required inspections at plan review and all are prepaid. Call Development Services at (512) 327-1838.

Estimate only. Confirm with the Rollingwood building department before applying. Apply online. Phone: (512) 327-1838. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Rollingwood

Homeowners and contractors planning a project check Rollingwood building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Rollingwood

Apply online through My Government Online (MGO); the city requires all permit applications to be submitted there, and its instructions are linked from the permitting page. Any exterior work also needs a notice of application: once your application is complete, the city gives you forms to mail to property owners within 250 feet, and plans are not sent for review until the 18 day notice period ends. Required inspections are listed in the plan review and must be prepaid before the permit is issued; schedule them through the MGO portal before 4 pm for next day service, or contact Development Services by phone or email. Questions go to developmentservices@rollingwoodtx.gov.

Source: Rollingwood application instructions

Apply online: Rollingwood permit portal
Building Department Contact
Address
403 Nixon Drive, Rollingwood, TX 78746
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Travis County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Rollingwood Permit Fee FAQs

How Much Does a Building Permit Cost in Rollingwood?

The building permit for a residential remodel runs $360.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Rollingwood's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Are Permit Fees Calculated in Rollingwood?

A residential building permit is $225.00 base, plus $0.25 per sq ft (project area). Electrical, Plumbing, and Mechanical / HVAC permits are priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Rollingwood Fee Schedule (Appendix A), posted copy headed 'Amended September 17, 2025' (Res. No. 2025-09-17-32, adopted 9/17/2025). See the official schedule. Last verified .

Other Jurisdictions in Travis County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.