PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Prairie View, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Prairie View, straight from the official fee schedule, with a free permit fee calculator below.

Prairie View's fees come from its Code of Ordinances: the residential building table was adopted in 2019 and the trade, administrative and certificate fees in 1989. Texas law (Local Government Code 214.908) ends a building permit fee ten years after adoption unless the City reauthorizes it, and the City Council took up a new building inspection and permitting services contract in August 2026, so confirm current fees with the Permit Clerk before you apply.

Building Permit
$105.00
$50,000 remodel
Open in calculator
Roofing Permit
$105.00
$20,000 re-roof
Open in calculator
HVAC Permit
$105.00
$10,000 change-out
Open in calculator
Electrical Permit
$105.00
$10,000 panel or rewire
Open in calculator
Plumbing Permit
$105.00
$10,000 repipe
Open in calculator

In Prairie View, a building permit for a $50,000 remodel runs $105.00 in permit fees, a $20,000 re-roof $105.00, a $10,000 HVAC change-out $105.00, a $10,000 electrical panel upgrade or rewire $105.00, and a $10,000 whole-house repipe $105.00. Totals include the documented surcharges and minimum fees. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Prairie View Code of Ordinances, Chapter 3, Article 3.800 Fees (Ord. 112789A of 1989; residential building table Ord. O2019-0812-001 of 2019)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits. Minimum permit fee: $10.00.

Official Fee Schedule

Call the building department at (936) 857-3711.

How Prairie View values a job: The building official determines valuation as the total value of all construction work under the permit, including finish work, painting, roofing, plumbing, electrical, mechanical, heating, air conditioning, gas systems and permanent equipment.

Last verified: November 3, 2026

Prairie View Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Prairie View

Residential (1–2 family): Remodel or addition (building trade permit)
$100.00 flat
Residential (1–2 family): New home (per sq ft)
tiered rates by sq ft
Up to 1,500 sq ft
$785.00
Over 1,500, up to 10,000 sq ft
$785.00 plus $0.35 per additional sq ft
Over 10,000 sq ft
$3,760.00 plus $0.15 per additional sq ft
Residential (1–2 family): Residential project of a type the City's table does not list
$160.00 flat‡
Demolition of a building or structure
$25.00 for the first 1 story, plus $20.00 per story
Administrative Fee
$5.00
Certificate of Occupancy (new or converted building) (does not apply to some listed rules) (if applicable)
$35.00
Investigation Fee (work started without a permit) (if applicable)
100% of the permit fee, minimum $10.00 (Equal to the permit fee, minimum $10)
Reinspection Fee (each) (if applicable)
$25.00
Temporary Certificate of Occupancy (does not apply to some listed rules) (if applicable)
$25.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Prairie View

Homeowners and contractors planning a project check Prairie View building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Prairie View Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

Estimated building permit fee
$105.00
Included in this total
Building Permit Fee$100.00
$100.00 flat
Administrative Fee$5.00
Total Estimate$105.00

Prairie View's fees come from its Code of Ordinances: the residential building table was adopted in 2019 and the trade, administrative and certificate fees in 1989. Texas law (Local Government Code 214.908) ends a building permit fee ten years after adoption unless the City reauthorizes it, and the City Council took up a new building inspection and permitting services contract in August 2026, so confirm current fees with the Permit Clerk before you apply.

Estimate only. Confirm with the Prairie View building department before applying. Phone: (936) 857-3711. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Prairie View

Homeowners and contractors planning a project check Prairie View building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Prairie View

Download the Residential New Build Application, the Residential Misc. Permit App. or the Commercial Permit Application from the Forms section of the City's Document Center. Complete it with an original signature and submit it with your state license, driver's license and insurance (and a letter of approval with a driver's license if you let someone else pull the permit under your name), plus the plans listed in the packet's checklists. The Permit Clerk at City Hall, 44500 Business Highway 290, handles permits (phone (936) 857-3711, email permits@prairieviewtexas.gov). New construction pays a pre-construction engineering deposit at application ($500 residential, $5,000 commercial) by check, money order or online payment; the City refunds any amount above the actual engineering fees and bills any shortfall. Plan review and inspections are handled by the City's third-party building inspection provider named on the forms. General, electrical, plumbing, mechanical, irrigation and backflow contractors must register with the City; the registration form lists a $100 annual fee.

Source: Prairie View application instructions

Building Department Contact
Address
44500 Business Highway 290, P.O. Box 817, Prairie View, TX 77446
Hours
Monday to Friday, 8:30 a.m. to 4:30 p.m.

Prairie View Permit Fee FAQs

How Much Does a Building Permit Cost in Prairie View?

The building permit for a $50,000 residential remodel runs $105.00, including the documented surcharges and minimum fees. The estimate is built from Prairie View's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Prairie View?

The roofing permit for a $20,000 residential re-roof runs $105.00, based on Prairie View's sourced fee schedule.

How Are Permit Fees Calculated in Prairie View?

A residential building permit is $100.00 flat. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Is the Minimum Permit Fee in Prairie View?

The sourced schedule sets a minimum permit fee of $10.00; small jobs pay at least that much before surcharges. The calculator applies it automatically.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Prairie View Code of Ordinances, Chapter 3, Article 3.800 Fees (Ord. 112789A of 1989; residential building table Ord. O2019-0812-001 of 2019). See the official schedule. Last verified .

Other Jurisdictions in Waller County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Waller CountyHempsteadPrairie View
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.