Gulf Breeze, FL Permit Fees (2026)
Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Gulf Breeze, straight from the official fee schedule, with a free permit fee calculator below.
Building, electrical, plumbing, mechanical, and roofing permits for work in Gulf Breeze are issued by the Santa Rosa County building official, per Gulf Breeze Land Development Code Sec. 20-126(a), so Gulf Breeze projects are charged Santa Rosa County's permit fee schedule. The city separately charges its own plan review fee before the county permit is issued: a flat $125 for commercial review (Resolution 39-2026, from October 1, 2026) and $50.00 per hour with a one-hour minimum for residential and accessory structures. Santa Rosa County's $85 Site Permit, which the county charges on new homes, is included in estimates, but the city handles its own zoning approval, so ask Santa Rosa County Development Services whether it applies inside city limits. See the Santa Rosa County fee schedule
In Gulf Breeze, a building permit for a $50,000 remodel runs $315.92 in permit fees, a $20,000 re-roof $190.28, a $10,000 HVAC change-out $106.00, a $10,000 electrical panel upgrade or rewire $106.00, and a whole-house repipe $139.50. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.
Jump to Permit Fee CalculatorSanta Rosa County, FL - Resolution No. 2025-29 (Development Services Fee Schedule, OR BK 4657 Pg 1706-1710, adopted 9/11/2025)
Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.
Building, electrical, plumbing, mechanical, and roofing permits for work in Gulf Breeze are issued by the Santa Rosa County building official, per Gulf Breeze Land Development Code Sec. 20-126(a), so Gulf Breeze projects are charged Santa Rosa County's permit fee schedule. The city separately charges its own plan review fee before the county permit is issued: a flat $125 for commercial review (Resolution 39-2026, from October 1, 2026) and $50.00 per hour with a one-hour minimum for residential and accessory structures. Santa Rosa County's $85 Site Permit, which the county charges on new homes, is included in estimates, but the city handles its own zoning approval, so ask Santa Rosa County Development Services whether it applies inside city limits. See the Santa Rosa County fee schedule
Apply online at the Gulf Breeze permit portal, or call 850-981-7000.
Schedule effective October 1, 2024. Last verified: September 26, 2026
This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed
Gulf Breeze Permit Fee Schedule
Every documented rule for each permit type, straight from the official schedule.
Mechanical / HVAC Permit Fees in Gulf Breeze
‡ Awaiting confirmation from the jurisdiction.
Homeowners and contractors planning a project check Gulf Breeze mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.
Advertise on This PageGulf Breeze Permit Fee Calculator
Pick a permit type and adjust the job value. Total updates instantly, itemized below.
‡ Awaiting confirmation from the jurisdiction.
Permit fees for Gulf Breeze are administered by Santa Rosa County; the fees shown are the Santa Rosa County schedule.
Estimate only. Confirm with the Santa Rosa County building department before applying. Apply online. Phone: 850-981-7000. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.
Homeowners and contractors planning a project check Gulf Breeze mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.
Advertise on This PageHow to Apply for a Permit in Gulf Breeze
Santa Rosa County Development Services issues building, roofing, electrical, plumbing and mechanical permits for work in Gulf Breeze; the City does not issue them. First get the City's development approval from the Gulf Breeze Community Services Department (main office 850-934-5109). The City's online forms, including New Single Family Residence and Renovation / Repair / Addition, are on its Permits and Applications page. Then apply for the county permit in My Government Online (MGO) and include the City's approval documents or stamps. The county reviews the plans, collects its permit fees, and takes inspection requests through your MGO account.
Source: Gulf Breeze application instructions
Apply online: Gulf Breeze permit portal- Phone
- 850-981-7000
- Address
- Santa Rosa County Development Services, 6051 Old Bagdad Highway, Suite 202, Milton, FL 32583
- Hours
- Monday to Friday, 8:00 a.m. to 4:00 p.m.
- Source
- Official contact page
Gulf Breeze Permit Fee FAQs
How Much Does a Building Permit Cost in Gulf Breeze?
How Much Does a Roofing Permit Cost in Gulf Breeze?
How Are Permit Fees Calculated in Gulf Breeze?
What Surcharges Are Added to Permits in Gulf Breeze?
Do I Need a Permit for a Small Residential Job in Gulf Breeze?
Where Do These Fees Come From?
Other Jurisdictions in Santa Rosa County
Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.
New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save. Wondering whether fees changed this year? See which Florida fee schedules are new.