FreeEvery fee straight from the official city and county fee schedules. No signup.

Argyle, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Argyle, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

Stand-alone residential electrical, plumbing and mechanical permits ($100) and residential demolition ($100) use the Town's posted fee table; the adopted code fee schedule includes that work in the $0.86 per sq ft residential building fee. The Town prints no roofing permit fee; residential reroofs are estimated at the $0.86 per sq ft repair rate on the roof area. Confirm with the Town before relying on these figures.

In Argyle, a building permit for a remodel runs $272.00 in permit fees, a re-roof $1,720.00, a $10,000 HVAC change-out $100.00, a $10,000 electrical panel upgrade or rewire $100.00, and a $10,000 whole-house repipe $100.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and a 2,000 sq ft roof. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Town of Argyle Permit Fees page; Code of Ordinances Appendix A, Exhibit D (Ord. 2019-15)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Argyle permit portal, or call 940-464-7273.

How Argyle values a job: Commercial and multifamily permits are priced on the applicant's actual construction value, which may not be less than the most recent ICC Building Valuation Data.

Schedules effective October 1, 2018 – June 26, 2019. Last verified: November 20, 2026

Argyle Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Argyle

Residential (1–2 family): New home, addition, remodel, repair, demolition, or accessory building
$0.86 per sq ft
Residential (1–2 family): Residential demolition permit
$100.00 flat‡
Commercial / 3+ units: Commercial or multifamily new building, addition, alteration, finish-out, or demolition (by valuation)
tiered rates by job value, minimum $100.00 (Top band read as over $1,000,000 (print says first $500,000))
Up to $500
$28.20
Over $500, up to $2,000
$28.20 plus $3.66 per additional $100
Over $2,000, up to $25,000
$83.10 plus $16.80 per additional $1,000
Over $25,000, up to $50,000
$469.50 plus $12.12 per additional $1,000
Over $50,000, up to $100,000
$772.50 plus $8.40 per additional $1,000
Over $100,000, up to $500,000
$1,192.50 plus $6.72 per additional $1,000
Over $500,000, up to $1,000,000
$3,880.50 plus $5.70 per additional $1,000
Over $1,000,000
$6,730.50 plus $4.38 per additional $1,000
Aboveground pool or spa
$150.00 flat
Fence or gate permit
$150.00 flat
In-ground swimming pool
$625.00 flat
Certificate of Occupancy (New Commercial Construction) (not with every fee above) (new construction)
$150.00
Plan Review Fee (not with every fee above)
65% of the permit fee

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Argyle

Homeowners and contractors planning a project check Argyle building permit fees here first.

One sponsor per trade, flat monthly rate.

Argyle Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

5 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$272.00
Included in this total
Building Permit Fee$172.00
200 sq ft × $0.86 per sq ft
Plan Review Fee (Residential)$100.00‡
Total Estimate$272.00

‡ Awaiting confirmation from the jurisdiction.

A note on these figures from the official schedule. Details

Stand-alone residential electrical, plumbing and mechanical permits ($100) and residential demolition ($100) use the Town's posted fee table; the adopted code fee schedule includes that work in the $0.86 per sq ft residential building fee. The Town prints no roofing permit fee; residential reroofs are estimated at the $0.86 per sq ft repair rate on the roof area. Confirm with the Town before relying on these figures.

Estimate only. Confirm with the Argyle building department before applying. Apply online. Phone: 940-464-7273. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Argyle

Homeowners and contractors planning a project check Argyle building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Argyle

Apply for permits online through the Town of Argyle permit portal (iWorQ). Pay permit fees with the Town's Credit Card Authorization Form from the portal, emailed to Permits@ArgyleTX.com, or in person at Town Hall, 308 Denton Street. Contractors must register with the Town before working in Town limits ($125 initial registration, $50 annual renewal).

Source: Argyle application instructions

Apply online: Argyle permit portal
Building Department Contact
Address
308 Denton Street, Argyle, TX 76226 (mail: P.O. Box 609)
Hours
Monday to Friday, 8 a.m. to 4:30 p.m.
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Denton County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Argyle Permit Fee FAQs

How Much Does a Building Permit Cost in Argyle?

The building permit for a residential remodel runs $272.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Argyle's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Argyle?

The roofing permit for a residential re-roof runs $1,720.00, assuming a 2,000 sq ft roof (the schedule prices per unit), based on Argyle's sourced fee schedule.

How Are Permit Fees Calculated in Argyle?

A residential building permit is $0.86 per sq ft. Electrical, Plumbing, and Mechanical / HVAC permits are flat fees; Roofing permits are priced per sq ft. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Argyle?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (65% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Town of Argyle Permit Fees page; Code of Ordinances Appendix A, Exhibit D (Ord. 2019-15). See the official schedule. Last verified .

Other Jurisdictions in Denton County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.