FreeEvery fee straight from the official city and county fee schedules. No signup.

Beasley, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Beasley, straight from the official fee schedule, with a free permit fee calculator below.

Beasley's permit fees are flat amounts set by Ordinance 2021-6 (November 16, 2021). The new home, remodel and commercial building fees include plan review and the electrical, plumbing and mechanical permits; the $165 trade fee is for stand-alone trade work. The City announced on October 20, 2026 that SAFEbuilt now performs its commercial inspections; confirm commercial fees with City Hall.

In Beasley, a building permit for a $50,000 remodel runs $942.00 in permit fees, a $20,000 re-roof $942.00, a $10,000 HVAC change-out $165.00, a $10,000 electrical panel upgrade or rewire $165.00, and a $10,000 whole-house repipe $165.00. Totals include the documented surcharges and minimum fees. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Beasley Ordinance 2021-6, Schedule of Fees Related to Construction or Subdivision (Section 1, Permit Fees; adopted November 16, 2021)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at (979) 387-2775.

Last verified: November 3, 2026

Beasley Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Beasley

Residential (1–2 family): Addition, alteration or remodel of a single-family home (trade permits included)
$942.00 flat
Residential (1–2 family): New single-family home (plan review and permit, trade permits included)
$2,010.00 flat
Commercial / 3+ units: Commercial or multi-family addition, alteration or remodel, or accessory shed or shop on that lot
$1,413.00 flat
Commercial / 3+ units: New commercial or multi-family building (4,000 sq ft or more, or over 2 stories)
$4,020.00 flat
Commercial / 3+ units: Small new commercial or multi-family building (under 4,000 sq ft and 2 stories or less)
$2,010.00 flat
Demolition only (no other work)
$75.00 flat
Other construction permit not listed in Ord. 2021-6 (scope not printed; ask the City)
$100.00 flat
Fire Alarm or Fire Sprinkler System Permit (per system) (if applicable)
$1,250.00
Plan Modification or Resubmittal Fee (select fee rules only) (if applicable)
$200.00
Reinspection Fee (second and later failed inspections) (if applicable)
$90.00
Sponsor This Page
Be the Featured General Contractor in Beasley

Homeowners and contractors planning a project check Beasley building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Beasley Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

Estimated building permit fee
$942.00
Building Permit Fee$942.00
$942.00 flat
Total Estimate$942.00

Beasley's permit fees are flat amounts set by Ordinance 2021-6 (November 16, 2021). The new home, remodel and commercial building fees include plan review and the electrical, plumbing and mechanical permits; the $165 trade fee is for stand-alone trade work. The City announced on October 20, 2026 that SAFEbuilt now performs its commercial inspections; confirm commercial fees with City Hall.

This fee rate is higher than in most Texas jurisdictions; it matches Beasley's official schedule as published.

Estimate only. Confirm with the Beasley building department before applying. Phone: (979) 387-2775. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Beasley

Homeowners and contractors planning a project check Beasley building permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Beasley

Beasley issues its own building, electrical, plumbing and mechanical permits through City Hall; there is no online permit portal. Before applying, contractors must have a contractor registration form, a copy of their current state license and insurance on file with the City. Submit the Building Plan Review and Permit Application (the Commercial Building Application for commercial work, or the electrical, mechanical or plumbing permit application for stand-alone trade work) with construction plans; plans may be submitted electronically. Commercial work costing $50,000 or more needs proof that plans were submitted to the Texas Department of Licensing and Regulation, and demolition needs an asbestos survey acknowledgment. The City announced in October 2026 that SAFEbuilt now performs its commercial inspections; call City Hall to confirm where commercial plans go. When the plans are approved, deliver a hard copy of the application and the permit fees to City Hall, 319 S. 3rd Street, to receive the permit, and keep the permit on site. Work in the street right-of-way, land disturbance and civil infrastructure such as water or sewer lines need separate applications.

Source: Beasley application instructions

Building Department Contact
Address
319 S. 3rd Street, Beasley, TX 77417 (mail: P.O. Box 122, Beasley, TX 77417)
Hours
Monday to Friday, 9:00 a.m. to 3:00 p.m.

Beasley Permit Fee FAQs

How Much Does a Building Permit Cost in Beasley?

The building permit for a $50,000 residential remodel runs $942.00, including the documented surcharges and minimum fees. The estimate is built from Beasley's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Beasley?

The roofing permit for a $20,000 residential re-roof runs $942.00, based on Beasley's sourced fee schedule.

How Are Permit Fees Calculated in Beasley?

A residential building permit is $942.00 flat. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Beasley Ordinance 2021-6, Schedule of Fees Related to Construction or Subdivision (Section 1, Permit Fees; adopted November 16, 2021). See the official schedule. Last verified .

Other Jurisdictions in Fort Bend County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.