FreeEvery fee straight from the official city and county fee schedules. No signup.

Fulshear, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Fulshear, straight from the official fee schedule, with a free permit fee calculator below.

In Fulshear, a building permit for a remodel runs $740.00 in permit fees, a $20,000 re-roof $95.00, a $10,000 HVAC change-out $95.00, a $10,000 electrical panel upgrade or rewire $95.00, and a $10,000 whole-house repipe $95.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Fulshear Master Fee Schedule (updated 07/21/2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Fulshear permit portal, or call 281-346-1796.

How Fulshear values a job: Commercial valuation includes site work.

Last verified: November 3, 2026

Fulshear Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Electrical Permit Fees in Fulshear

Residential (1–2 family): Residential electrical work
$95.00 flat (Charged per electrical inspection; one inspection shown)‡
Commercial / 3+ units: Commercial electrical work
$300.00 flat (Charged per electrical inspection; one inspection shown)‡
Re-inspection Fee (if applicable)
$60.00

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured Electrician in Fulshear

Homeowners and contractors planning a project check Fulshear electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Fulshear Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Estimated electrical permit fee
$95.00
Electrical Permit Fee$95.00‡
$95.00 flat
Charged per electrical inspection; one inspection shown
Total Estimate$95.00

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the Fulshear building department before applying. Apply online. Phone: 281-346-1796. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured Electrician in Fulshear

Homeowners and contractors planning a project check Fulshear electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Fulshear

Apply online through the City of Fulshear GovWell permit portal. Questions and status updates go to the Planning Department at permits@fulsheartexas.gov or 281-346-1796. Work inside the city limits and the extraterritorial jurisdiction needs a permit before it starts. Contractors must register with the city first (general residential and commercial, irrigation, sign and pool contractors pay a $200 annual registration; electrical, plumbing and mechanical contractors register at no fee) and give the city their license, a driver's license and proof of at least $1,000,000 general liability insurance naming the city as additional insured. Electrical inspection fees are collected from the building permit applicant, not from the electrician.

Source: Fulshear application instructions

Apply online: Fulshear permit portal
Building Department Contact
Address
6611 W. Cross Creek Bend Ln., Fulshear, TX 77441
Hours
Monday through Friday 8:00 AM to 5:00 PM

Fulshear Permit Fee FAQs

How Much Does a Building Permit Cost in Fulshear?

The building permit for a residential remodel runs $740.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Fulshear's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Fulshear?

The roofing permit for a $20,000 residential re-roof runs $95.00, based on Fulshear's sourced fee schedule.

How Are Permit Fees Calculated in Fulshear?

A residential building permit is $0.35 per sq ft. Electrical, Plumbing, Mechanical / HVAC, and Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Fulshear?

On top of the base permit fee, the sourced schedule adds Commercial Plan Review Fee (50% of the permit fee (One-half of the valuation permit fee, due at submittal)) and Plan Review Fee (50% of the permit fee (One-half of the per-square-foot permit fee)). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Fulshear Master Fee Schedule (updated 07/21/2026). See the official schedule. Last verified .

Other Jurisdictions in Fort Bend County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.