FreeEvery fee straight from the official city and county fee schedules. No signup.

Rosenberg, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Rosenberg, straight from the official fee schedule, with a free permit fee calculator below.

Estimates include the 50% plan review fee on building and roofing permits and the Fire Marshal's $100 certificate of occupancy fee on new construction. Other fire code permit fees, impact fees, water and sewer tap fees, the development permit and the $100 contractor registration are not included. Re-inspections cost $100 each, and work started without a permit is charged a $275 investigation fee. Commercial projects with an estimated cost of $50,000 or more also need accessibility registration with TDLR, paid to TDLR directly.

In Rosenberg, a building permit for a $50,000 remodel runs $663.00 in permit fees, a $20,000 re-roof $112.50, a $10,000 HVAC change-out $220.00, and an electrical panel upgrade or rewire $45.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume one item. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Rosenberg Schedule of Fees (posted 10/02/2026); building, trade and development fees per Resolutions R-3576 and R-4093 (R-4093 adopted 8/18/2026, effective 9/1/2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Rosenberg permit portal, or call 832-595-3500.

Schedule effective September 1, 2026. Last verified: November 3, 2026

Rosenberg Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Mechanical / HVAC Permit Fees in Rosenberg

Commercial / 3+ units: Commercial kitchen exhaust, replacement or new (2% of total job cost)
2% of job value
Replacement of a heating or air conditioning system (2% of total job cost)
2% of job value
New heating or air conditioning system in new construction
$10.00 per ton
Refrigeration equipment, replacement or new connection
$15.00 per hp (horsepower)
Walk-in cooler or freezer
$0.50 per cubic foot (walk-in cooler or freezer)
Permit Application Fee (Mechanical)
$20.00
After-Hours or Weekend Inspection (if applicable)
$100.00 per hour (after-hours or weekend inspection) (Three-hour minimum charge)
Investigation Fee (Work Started Without a Permit) (if applicable)
$275.00
Re-inspection Fee (if applicable)
$100.00
Sponsor This Page
Be the Featured HVAC Company in Rosenberg

Homeowners and contractors planning a project check Rosenberg mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Rosenberg Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

$
$500$50,000
Estimated mechanical / HVAC permit fee
$220.00
Included in this total
Mechanical / HVAC Permit Fee$200.00
$10,000 × 2%
Permit Application Fee (Mechanical)$20.00
Total Estimate$220.00

Estimates include the 50% plan review fee on building and roofing permits and the Fire Marshal's $100 certificate of occupancy fee on new construction. Other fire code permit fees, impact fees, water and sewer tap fees, the development permit and the $100 contractor registration are not included. Re-inspections cost $100 each, and work started without a permit is charged a $275 investigation fee. Commercial projects with an estimated cost of $50,000 or more also need accessibility registration with TDLR, paid to TDLR directly.

Fees are charged on the value your jurisdiction assigns to the work; many use ICC square-footage valuation tables or your contract price, whichever is greater. If the assigned value is higher than your contract, the actual fee will be higher too.

Estimate only. Confirm with the Rosenberg building department before applying. Apply online. Phone: 832-595-3500. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured HVAC Company in Rosenberg

Homeowners and contractors planning a project check Rosenberg mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Rosenberg

Apply online through the City's MGO Connect portal (My Government Online): upload documents, follow plan review, schedule inspections and pay permit fees there. Depending on the work, a project may need one or more separate permits: building, concrete (sidewalks and driveways in the public right-of-way), development (site plan), electrical, mechanical (heating and air conditioning) and plumbing. The Building Permits and Inspections page lists work that needs no permit, including fences not over 7 feet high, finish work such as cabinets, flooring and painting, and ordinary minor repairs. The Schedule of Fees lists a $100 general contractor registration. Inspection requests received before 3 p.m. are scheduled for the next business day; later requests are scheduled two business days out. For questions call Building Inspections at 832-595-3500.

Source: Rosenberg application instructions

Apply online: Rosenberg permit portal
Building Department Contact
Address
Building Inspections and Code Enforcement, City Hall Annex, 2220 4th Street, Rosenberg, TX 77471
Hours
Monday through Thursday 7:30 am to 5:30 pm, Friday 8 am to 5 pm

Rosenberg Permit Fee FAQs

How Much Does a Building Permit Cost in Rosenberg?

The building permit for a $50,000 residential remodel runs $663.00, including the documented surcharges and minimum fees. The estimate is built from Rosenberg's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Rosenberg?

The roofing permit for a $20,000 residential re-roof runs $112.50, based on Rosenberg's sourced fee schedule.

How Are Permit Fees Calculated in Rosenberg?

A residential building permit is tiered rates by job value. Electrical and Plumbing permits are priced per item; Mechanical / HVAC permits scale with the value of the job; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Rosenberg?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (50% of the permit fee (50% of the building permit fee)). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Rosenberg Schedule of Fees (posted 10/02/2026); building, trade and development fees per Resolutions R-3576 and R-4093 (R-4093 adopted 8/18/2026, effective 9/1/2026). See the official schedule. Last verified .

Other Jurisdictions in Fort Bend County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.