Edgecliff Village, TX Permit Fees (2026)
Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Edgecliff Village, straight from the official fee schedule, with a free permit fee calculator below.
A note on these figures from the official schedule. Details
The Town's posted trade permit application forms still print older fee amounts than its current fee ordinance (Ord. 391-24, November 2024); this page uses the ordinance figures. Commercial building fees follow the Town's adopted valuation table, whose printed band bases do not run continuously. Unlisted commercial electrical and plumbing work is printed at $60 per $500 of job value; the ordinance's separate Unlisted Commercial table ($60 plus $100 to $200, up to $10,000 of job value) may instead be what the Town charges for that work, which would be far lower. Confirm these with the Town before relying on them.
In Edgecliff Village, a building permit for a remodel runs $85.80 in permit fees, a $20,000 re-roof $150.00, an HVAC change-out $180.00, a $10,000 electrical panel upgrade or rewire $270.00, and a $10,000 whole-house repipe $180.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area and one system. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.
Jump to Permit Fee CalculatorTown of Edgecliff Village Ordinance No. 391-24, Appendix A Fee Schedule amendments (Art. A2.000 Building and Construction Permits), passed November 14, 2024
Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.
Call the building department at (817) 293-4313.
Last verified: November 18, 2026
Edgecliff Village Permit Fee Schedule
Every documented rule for each permit type, straight from the official schedule.
Building Permit Fees in Edgecliff Village
‡ Awaiting confirmation from the jurisdiction.
Homeowners and contractors planning a project check Edgecliff Village building permit fees here first.
One sponsor per trade, flat monthly rate.
Edgecliff Village Permit Fee Calculator
Pick a permit type and adjust the job value. Total updates instantly, itemized below.
6 documented rates for this permit type; pick the one that matches your job.
‡ Awaiting confirmation from the jurisdiction.
A note on these figures from the official schedule. Details
The Town's posted trade permit application forms still print older fee amounts than its current fee ordinance (Ord. 391-24, November 2024); this page uses the ordinance figures. Commercial building fees follow the Town's adopted valuation table, whose printed band bases do not run continuously. Unlisted commercial electrical and plumbing work is printed at $60 per $500 of job value; the ordinance's separate Unlisted Commercial table ($60 plus $100 to $200, up to $10,000 of job value) may instead be what the Town charges for that work, which would be far lower. Confirm these with the Town before relying on them.
Estimate only. Confirm with the Edgecliff Village building department before applying. Phone: (817) 293-4313. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.
Homeowners and contractors planning a project check Edgecliff Village building permit fees here first.
One sponsor per trade, flat monthly rate.
How to Apply for a Permit in Edgecliff Village
Edgecliff Village issues building, mechanical, electrical, plumbing, fence and driveway approach or curb-cut permits at City Hall, 1605 Edgecliff Rd.
Every contractor working in the town must register with the town and submit a separate application for each permit. Paper application forms are posted on the town's Forms and Applications page, and the town links no online permit portal.
The general contractor pays the permit fees for the project and makes sure every subcontractor is registered and has filed its own permit application at City Hall.
Submit business insurance, licenses and contractor ID with both the registration and the permit applications. Plan review can take up to 10 business days, and plans that need engineer review may be invoiced by the town.
Inspections need 24 hours notice and are made between 12:00 p.m. and 5:00 p.m.; call (817) 293-4313 to schedule.
Questions: call the Permit Clerk at (817) 293-4313.
Source: Edgecliff Village application instructions
- Phone
- (817) 293-4313
- Address
- City Hall, 1605 Edgecliff Rd., Edgecliff Village, TX
- Source
- Official contact page
Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.
One expediter per county.
Edgecliff Village Permit Fee FAQs
How Much Does a Building Permit Cost in Edgecliff Village?
How Much Does a Roofing Permit Cost in Edgecliff Village?
How Are Permit Fees Calculated in Edgecliff Village?
What Surcharges Are Added to Permits in Edgecliff Village?
Where Do These Fees Come From?
Other Jurisdictions in Tarrant County
Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.