FreeEvery fee straight from the official city and county fee schedules. No signup.

Everman, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Everman, straight from the official fee schedule, with a free permit fee calculator below.

In Everman, a building permit for a remodel runs $990.00 in permit fees, a $20,000 re-roof $430.10, an HVAC change-out $130.00, a $10,000 electrical panel upgrade or rewire $125.00, and a whole-house repipe $274.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area, one system, and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Everman Fee Schedule, Exhibit A to Ordinance No. 855 (effective September 1, 2026), in the August 11, 2026 City Council agenda packet

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Everman permit portal, or call (817) 293-0525.

How Everman values a job: Commercial and multi-family permit fees use the declared valuation of the work, including architectural, structural, electrical, plumbing, mechanical, paving, parking and drive approach work and the contractor's profit; one- and two-family homes are priced by square footage.

Schedule effective September 1, 2026. Last verified: November 18, 2026

Everman Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Everman

Residential (1–2 family): Addition, alteration, remodel, repair or garage conversion (Table 2, per sq ft)
tiered rates by sq ft, minimum $250.00‡
Up to 1,500 sq ft
$990.00
Over 1,500, up to 3,000 sq ft
$990.00 plus $0.64 per additional sq ft
Over 3,000 sq ft
$1,950.00 plus $0.53 per additional sq ft
Residential (1–2 family): New one- or two-family home (Table 2, per sq ft)
tiered rates by sq ft
Up to 1,500 sq ft
$990.00
Over 1,500, up to 3,000 sq ft
$990.00 plus $0.64 per additional sq ft
Over 3,000 sq ft
$1,950.00 plus $0.53 per additional sq ft
Residential (1–2 family): Above-ground swimming pool (one- or two-family)
$125.00 flat
Residential (1–2 family): Fence on a residential lot
$25.00 flat
Residential (1–2 family): Foundation repair (one- or two-family)
$200.00 flat
Residential (1–2 family): Gunite in-ground spa (one- or two-family)
$35.00 flat
Residential (1–2 family): In-ground swimming pool, spa included (one- or two-family)
$275.00 flat
Residential (1–2 family): Solar panel installation (one- or two-family)
$275.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Everman

Homeowners and contractors planning a project check Everman building permit fees here first.

One sponsor per trade, flat monthly rate.

Everman Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

10 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$990.00
Building Permit Fee$990.00‡
$990.00 flat for up to 1,500 sq ft (see the fee table above)
Total Estimate$990.00

‡ Awaiting confirmation from the jurisdiction.

This fee rate is higher than in most Texas jurisdictions; it matches Everman's official schedule as published.

Estimate only. Confirm with the Everman building department before applying. Apply online. Phone: (817) 293-0525. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Everman

Homeowners and contractors planning a project check Everman building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Everman

Everman takes building, electrical, mechanical and plumbing permit applications online only (since January 1, 2021) through the City's iWorQ Permit Application Portal.

Contractors must register with the City in the portal before applying; incomplete applications are not processed and no permits are issued to unregistered contractors.

Electrical, mechanical and plumbing work that is part of a new building, addition or remodel still needs its own permit, issued at no charge.

The Building/Fire Official may take up to ten business days for plan review, and plans needing engineer review may be invoiced separately by the City.

Source: Everman application instructions

Apply online: Everman permit portal
Building Department Contact
Address
212 N. Race St., Everman, TX 76140
Hours
Monday-Thursday 7 am-6 pm
Source
https://www.evermantx.us/permits-request-and-forms (address and hours); https://www.evermantx.us/contact-us (main phone)
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Tarrant County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Everman Permit Fee FAQs

How Much Does a Building Permit Cost in Everman?

The building permit for a residential remodel runs $990.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Everman's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Everman?

The roofing permit for a $20,000 residential re-roof runs $430.10, based on Everman's sourced fee schedule.

How Are Permit Fees Calculated in Everman?

A residential building permit is tiered rates by sq ft, minimum $250.00. Electrical permits are flat fees for the default job (Service or sub-panel, new, repair or replace, up to 200 amps), while other work is priced per station or is priced per fixture or opening; Plumbing permits are priced per fixture; Mechanical / HVAC permits are priced per system; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Everman Fee Schedule, Exhibit A to Ordinance No. 855 (effective September 1, 2026), in the August 11, 2026 City Council agenda packet. See the official schedule. Last verified .

Other Jurisdictions in Tarrant County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.