PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Grapevine, TX Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Grapevine, straight from the official fee schedule, with a free permit fee calculator below.

The City's posted trade permit application lists residential A/C and water heater change-outs at $37 and groups home alterations with the home-size trade table, which the adopted fee ordinance does not; residential trade alteration estimates here need confirmation with Building Services.

Building Permit
$200.00
200 sq ft remodel area
Open in calculator
Roofing Permit
$150.00
$20,000 re-roof
Open in calculator
HVAC Permit
$37.00
$10,000 change-out
Open in calculator
Electrical Permit
$117.00
$10,000 panel or rewire
Open in calculator
Plumbing Permit
$37.00
$10,000 repipe
Open in calculator

In Grapevine, a building permit for a remodel runs $200.00 in permit fees, a $20,000 re-roof $150.00, a $10,000 HVAC change-out $37.00, a $10,000 electrical panel upgrade or rewire $117.00, and a $10,000 whole-house repipe $37.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Ordinance 2023-081 fee tables: Building Permit Fees (Table No. 1-A, Rev. 12/2023) and Electrical, Plumbing, Mechanical and Irrigation Permit Application (Rev. 1-2024)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Apply online at the Grapevine permit portal, or call 817-410-3165.

How Grapevine values a job: Commercial building permits use the greater of the contract valuation or the City's adopted building valuation table (based on ICC Building Valuation Data); trade permits for alterations use the contract valuation of the work.

Schedule effective January 1, 2024. Last verified: November 3, 2026

Grapevine Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Plumbing Permit Fees in Grapevine

Residential (1–2 family): Residential stand-alone plumbing, water heater, backflow replacement, or sewer repair
$37.00 flat†
Residential (1–2 family): New home, duplex, or townhome (by total sq ft under roof)
tiered rates by sq ft
Up to 749 sq ft
$33.25
Over 749, up to 1,199 sq ft
$49.88
Over 1,199, up to 1,500 sq ft
$63.18
Over 1,500, up to 1,750 sq ft
$76.48
Over 1,750, up to 2,000 sq ft
$83.13
Over 2,000, up to 2,250 sq ft
$89.78
Over 2,250, up to 3,000 sq ft
$96.43
Over 3,000, up to 3,500 sq ft
$103.08
Over 3,500, up to 4,000 sq ft
$109.73
Over 4,000 sq ft
$120.37
Commercial / 3+ units: Commercial alteration, finish-out, shell completion, or accessory structure (by contract value)
tiered rates by job value (Printed as a base plus a rate per dollar of contract value)
Up to $500
$37.00
Over $500, up to $1,500
$45.00
Over $1,500, up to $3,000
$57.00
Over $3,000, up to $5,000
$72.00
Over $5,000, up to $50,000
$72.00 plus $9.00 per additional $1,000
Over $50,000, up to $100,000
$477.00 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$827.00 plus $5.00 per additional $1,000
Over $500,000
$2,827.00 plus $3.00 per additional $1,000
Commercial / 3+ units: New office, retail, warehouse, factory, garage, or service station (by sq ft)
tiered rates by sq ft (Printed as a base plus a rate per sq ft of total area)
Up to 500 sq ft
$37.00
Over 500, up to 50,000 sq ft
$37.00 plus $0.01 per additional sq ft
Over 50,000, up to 100,000 sq ft
$532.00 plus $0.01 per additional sq ft
Over 100,000 sq ft
$882.00 plus $0.00 per additional sq ft
Commercial / 3+ units: New hotel, apartment, restaurant, school, assembly, or institutional building (by sq ft)
tiered rates by sq ft (Printed as $17.50 plus $0.035 per sq ft of total area)‡
Up to 500 sq ft
$37.00
Over 500, up to 100,000 sq ft
$35.00 plus $0.04 per additional sq ft
Lawn irrigation system
$37.00 flat
Swimming pool plumbing
$37.00 flat

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured Plumber in Grapevine

Homeowners and contractors planning a project check Grapevine plumbing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Grapevine Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

Estimated plumbing permit fee
$37.00
Plumbing Permit Fee$37.00
$37.00 flat
Total Estimate$37.00

The City's posted trade permit application lists residential A/C and water heater change-outs at $37 and groups home alterations with the home-size trade table, which the adopted fee ordinance does not; residential trade alteration estimates here need confirmation with Building Services.

Estimate only. Confirm with the Grapevine building department before applying. Apply online. Phone: 817-410-3165. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured Plumber in Grapevine

Homeowners and contractors planning a project check Grapevine plumbing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Grapevine

The City's OpenGov portal (https://grapevinetx.portal.opengov.com/) lists building permit types (new homes, additions, alterations, reroofs, fences and commercial work), electrical, plumbing and mechanical permit types, and new contractor registration.

The Applications and Permits page also describes filing the paper application with the required plans, delivered, couriered or mailed to City of Grapevine, Attn: Building Inspection Department, 200 S. Main Street, Grapevine, TX 76051.

All commercial and sign submittals pay the plan review fee when the application is submitted.

Target turnaround: same day for simple trade permits (water heaters, A/C change-outs, electrical repairs); 5 to 7 business days for residential storage buildings and fences; 7 to 10 business days for new homes, additions, remodels and commercial alterations; 10 business days for new commercial buildings.

Questions: Building Services, 817-410-3165 or 817-410-3166, Monday to Friday, 8 am to 4:30 pm.

Source: Grapevine application instructions

Apply online: Grapevine permit portal
Building Department Contact
Phone
817-410-3165 or 817-410-3166
Address
200 S. Main Street, Grapevine, TX 76051
Hours
Monday to Friday, 8 am to 4:30 pm

Grapevine Permit Fee FAQs

How Much Does a Building Permit Cost in Grapevine?

The building permit for a residential remodel runs $200.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Grapevine's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Grapevine?

The roofing permit for a $20,000 residential re-roof runs $150.00, based on Grapevine's sourced fee schedule.

How Are Permit Fees Calculated in Grapevine?

A residential building permit is $1.00 per sq ft (area of addition or alteration). Electrical permits scale with the value of the job; Plumbing permits are flat fees for the default job (Residential stand-alone plumbing, water heater, backflow replacement, or sewer repair), while new construction is priced per sq ft; Mechanical / HVAC permits are flat fees for the default job (Residential A/C or water heater change-out), while other work scales with the value of the job or is priced per sq ft; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Grapevine?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (65% of the permit fee), Plan Review Fee (Commercial Reroof) (65% of the permit fee) and Plan Review Fee (Residential Fence) (65% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Ordinance 2023-081 fee tables: Building Permit Fees (Table No. 1-A, Rev. 12/2023) and Electrical, Plumbing, Mechanical and Irrigation Permit Application (Rev. 1-2024). See the official schedule. Last verified .

Other Jurisdictions in Tarrant County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Tarrant CountyArlingtonAzleBedfordBenbrookColleyvilleCrowleyEulessFort WorthGrapevineHaltom CityHurstKellerKennedaleMansfieldNorth Richland HillsRichland HillsSaginawSouthlakeWataugaWhite Settlement
Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.