FreeEvery fee straight from the official city and county fee schedules. No signup.

Cedar Park, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Cedar Park, straight from the official fee schedule, with a free permit fee calculator below.

In Cedar Park, a building permit for a $50,000 remodel runs $150.00 in permit fees, a $20,000 re-roof $50.00, a $10,000 HVAC change-out $50.00, a $10,000 electrical panel upgrade or rewire $100.00, and a $10,000 whole-house repipe $100.00. Totals include the documented surcharges and minimum fees. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Cedar Park Ordinance CO07.23.12.21.E1, Appendix A Fee Schedule (Art. 2.000 Development Service Related Fees and Art. 4.000 Fire Protection Related Fees), effective February 1, 2024

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Cedar Park permit portal, or call 512-401-5100.

How Cedar Park values a job: Commercial plan review is priced on valuation calculated from the most current ICC Building Valuation Data table.

Schedule effective February 1, 2024. Last verified: November 20, 2026

Cedar Park Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Cedar Park

Residential (1–2 family): Residential remodel
$50.00 flat
Residential (1–2 family): New single-family home or townhome
$0.10 per sq ft (foundation/floor area incl. porches and patios), minimum $25.00
Residential (1–2 family): New manufactured home
$0.10 per sq ft, minimum $25.00
Commercial / 3+ units: Commercial remodel
$100.00 flat
Commercial / 3+ units: New commercial building
$0.10 per sq ft (foundation/floor area), minimum $35.00
Commercial / 3+ units: Lease space finish-out
$0.10 per sq ft (foundation/floor area), minimum $35.00
Commercial / 3+ units: Foundation-only permit
tiered rates by sq ft‡
Up to 2,500 sq ft
$100.00
Over 2,500 sq ft
$100.00 plus $0.04 per additional sq ft
Above-ground swimming pool
$50.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Cedar Park

Homeowners and contractors planning a project check Cedar Park building permit fees here first.

One sponsor per trade, flat monthly rate.

Cedar Park Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

6 documented rates for this permit type; pick the one that matches your job.

Estimated building permit fee
$150.00
Included in this total
Building Permit Fee$50.00
$50.00 flat
Remodel Plan Review Fee (Residential)$100.00
Total Estimate$150.00

Estimate only. Confirm with the Cedar Park building department before applying. Apply online. Phone: 512-401-5100. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Cedar Park

Homeowners and contractors planning a project check Cedar Park building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Cedar Park

Apply online through the City's MGO Connect (My Government Online) portal, where you create an account, submit a permit application, check its status, pay fees and request inspections. All contractors must register with the City through MGO Connect before pulling permits; registration is free.

Source: Cedar Park application instructions

Apply online: Cedar Park permit portal
Building Department Contact
Address
450 Cypress Creek Road, Building 1, Cedar Park, TX 78613
Hours
Monday through Friday, 8 am to 5 pm
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Williamson County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Cedar Park Permit Fee FAQs

How Much Does a Building Permit Cost in Cedar Park?

The building permit for a $50,000 residential remodel runs $150.00, including the documented surcharges and minimum fees. The estimate is built from Cedar Park's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Cedar Park?

The roofing permit for a $20,000 residential re-roof runs $50.00, based on Cedar Park's sourced fee schedule.

How Are Permit Fees Calculated in Cedar Park?

A residential building permit is $50.00 flat. Electrical permits are flat fees for the default job (Electrical work with a residential remodel), while other work is priced per sq ft or is priced per amp; Plumbing permits are flat fees for the default job (Plumbing work with a residential remodel), while new construction is priced per sq ft; Mechanical / HVAC permits are flat fees for the default job (HVAC change-out or addition), while new construction is priced per unit; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Cedar Park?

On top of the base permit fee, the sourced schedule adds Electrical Plan Review Fee (Commercial, In-House) (25% of designated fees (25% of the commercial building plan review fee)), Energy Conservation Plan Review Fee (Commercial, In-House) (25% of designated fees (25% of the commercial building plan review fee)), Mechanical Plan Review Fee (Commercial, In-House) (25% of designated fees (25% of the commercial building plan review fee)) and Plumbing Plan Review Fee (Commercial, In-House) (25% of designated fees (25% of the commercial building plan review fee)). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Cedar Park Ordinance CO07.23.12.21.E1, Appendix A Fee Schedule (Art. 2.000 Development Service Related Fees and Art. 4.000 Fire Protection Related Fees), effective February 1, 2024. See the official schedule. Last verified .

Other Jurisdictions in Williamson County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.