FreeEvery fee straight from the official city and county fee schedules. No signup.

Glendale, AZ Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Glendale, straight from the official fee schedule, with a free permit fee calculator below.

In Glendale, a building permit for a $50,000 remodel runs $1,434.78 in permit fees, a $20,000 re-roof $415.96, a $10,000 HVAC change-out $39.79, a $10,000 electrical panel upgrade or rewire $39.79, and a whole-house repipe $216.49. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

City of Glendale Community Development Fee Schedule (effective May 10, 2019), Building Safety

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Call the building department at 623-930-2800.

How Glendale values a job: Glendale values work at the estimated cost set by the Building Official from nationally recognized standards, including materials, labor, overhead, and profit, using the ICC Building Valuation Data and other valuation criteria the Building Official approves.

Schedule effective May 10, 2019. Last verified: October 9, 2026

Glendale Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Electrical Permit Fees in Glendale

Residential (1–2 family): Residential electrical work (base permit fee; item fees listed separately are added)
$29.79 flat‡
Residential (1–2 family): New home electrical permit
$29.79 base, plus $0.06 per sq ft (livable floor area)‡
Residential (1–2 family): Mobile home electrical upgrade or new service
$114.35 flat
Commercial / 3+ units: Commercial electrical work (base permit fee; item fees listed separately are added)
$59.01 flat, minimum $114.35‡
Commercial / 3+ units: Multi-family residential electrical
$59.01 base, plus $0.058 per sq ft (livable floor area), minimum $114.35‡
Electrical permit for a swimming pool or spa
$62.74 flat
Record Retention Fee
1% of the permit fee, minimum $10.00‡
Appliances, 1 HP or Less (each) (if applicable)
$6.00
Appliances, Less Than 1 HP (each) (if applicable)
$6.00
Appliances, More Than 1 HP (each) (if applicable)
$15.58
Bus Ways (each 100 LF) (if applicable)
$9.19
Certificate of Occupancy, Tenant Space With No Work (if applicable)
$114.35
Electrical Clearance for Utility Service (per request) (if applicable)
$114.35
Electrical Clearance for Utility Service (per request) (if applicable)
$114.35
Electrical Service, 200A or Less (if applicable)
$38.64
Electrical Service, 200A or Less (if applicable)
$38.64
Electrical Service, 201A to 999A (if applicable)
$78.75
Electrical Service, Over 200A (if applicable)
$78.75
Lighting Fixtures: Additional (each) (if applicable)
$0.89
Lighting Fixtures: Additional (each) (if applicable)
$0.89
Lighting Fixtures: First 20 (each) (if applicable)
$1.37
Lighting Fixtures: First 20 (each) (if applicable)
$1.36
Miscellaneous Electrical Item (each) (if applicable)
$29.50
Miscellaneous Electrical Item (each) (if applicable)
$23.04
Permit Renewal After Expiration (if applicable)
100% of the permit fee
Permit Renewal Before Expiration (if applicable)
50% of the permit fee
Pole or Platform Mounted Lighting (each) (if applicable)
$1.36
Power Apparatus, 1 HP or Less (each) (if applicable)
$6.00
Power Apparatus, More Than 1 HP, Less Than 10 HP (each) (if applicable)
$15.58
Power Apparatus, More Than 10 HP, Less Than 50 HP (each) (if applicable)
$31.17
Power Apparatus, More Than 100 HP (each) (if applicable)
$94.41
Power Apparatus, More Than 50 HP, Less Than 100 HP (each) (if applicable)
$62.74
Receptacles, Switches, and Outlets: Additional (each) (if applicable)
$0.89
Receptacles, Switches, and Outlets: Additional (each) (if applicable)
$0.89
Receptacles, Switches, and Outlets: First 20 (each) (if applicable)
$1.36
Receptacles, Switches, and Outlets: First 20 (each) (if applicable)
$1.36
Sub Panels (if applicable)
$38.64
Temporary Certificate of Occupancy (first, up to 30 days) (if applicable)
$531.22
Temporary Certificate of Occupancy, First 30-Day Extension (if applicable)
$1,062.46
Temporary Certificate of Occupancy, Second 30-Day Extension (if applicable)
$2,124.94
Temporary Power Meter Installation (if applicable)
$152.10
Temporary Power: Distribution System (in addition to pole or pedestal) (if applicable)
$15.58
Temporary Power: Meter Installation (if applicable)
$152.10
Temporary Power: Power Pole or Pedestal (if applicable)
$29.79
Theatrical-Type Lighting (each) (if applicable)
$1.36
Trade Plan Review Fee (electrical, plumbing, mechanical) (if applicable)
75% of the permit fee, minimum $122.88‡
Work Started Before Permit Issued (if applicable)
200% of the permit fee

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured Electrician in Glendale

Homeowners and contractors planning a project check Glendale electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Glendale Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

3 documented rates for this permit type; pick the one that matches your job.

Estimated electrical permit fee
$39.79
Included in this total
Electrical Permit Fee$29.79‡
$29.79 flat
Record Retention Fee$10.00‡
Total Estimate$39.79

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the Glendale building department before applying. Phone: 623-930-2800. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured Electrician in Glendale

Homeowners and contractors planning a project check Glendale electrical permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Glendale

Glendale Development Services (Building Safety, Codes & Services) takes building permit applications by email only, for electronic plan review. Send the completed fillable permit application, sealed construction drawings, and any calculations or specifications as PDF files to permits@glendaleaz.com, or use the city's online upload pages for houses, pools, solar, and signs or banners. Written applications are not accepted. Single-family additions, accessory structures, and accessory dwelling units need a Zoning Clearance Letter from the Planning Division before you apply for the building permit. Plan review fees are due when you submit the application. There is no online permit portal. Call 623-930-2800 with questions.

Source: Glendale application instructions

Building Department Contact
Address
5850 W. Glendale Ave., Glendale, AZ 85301
Hours
Monday to Friday, 8 a.m. to 5 p.m. (counter assistance)

Glendale Permit Fee FAQs

How Much Does a Building Permit Cost in Glendale?

The building permit for a $50,000 residential remodel runs $1,434.78, including the documented surcharges and minimum fees. The estimate is built from Glendale's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Glendale?

The roofing permit for a $20,000 residential re-roof runs $415.96, based on Glendale's sourced fee schedule.

How Are Permit Fees Calculated in Glendale?

A residential building permit is $29.79 for the first $500, then tiered rates by job value. Electrical permits are flat fees for the default job (Residential electrical work, base permit fee; item fees listed separately are added), while new construction is priced per sq ft; Plumbing permits are priced per fixture; Mechanical / HVAC permits are flat fees; Roofing permits scale with the value of the job. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Glendale?

On top of the base permit fee, the sourced schedule adds Building Plan Review Fee (75% of the permit fee, minimum $122.88) and Record Retention Fee (1% of the permit fee, minimum $10.00). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Glendale Community Development Fee Schedule (effective May 10, 2019), Building Safety. See the official schedule. Last verified .

Other Jurisdictions in Maricopa County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.