PermitFees.org
FreeEvery fee straight from the official city and county fee schedules. No signup.

Building Permit Fees in Edgewater, FL (2026)

Building Permit
$500.00
$50,000 remodel
Roofing Permit
$115.10
2,000 sq ft (20-square) roof
HVAC Permit
$136.00
$10,000 change-out
Electrical Permit
$86.50
$10,000 panel or rewire
Plumbing Permit
$174.50
15-fixture scope

In Edgewater, a building permit for a $50,000 remodel runs $500.00 in permit fees, a $20,000 re-roof $115.10, a $10,000 HVAC change-out $136.00, a $10,000 electrical panel upgrade or rewire $86.50, and a $10,000 whole-house repipe $174.50. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 2,000 sq ft (20-square) roof and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Source

Resolution 2025-R-27 (Fee Schedule, effective 10/1/2025)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

How Edgewater values a job: Building valuation is the higher of the actual contract/construction value or the value per the current edition of the ICC Building Valuation Data Table (published in the Building Safety Journal by the International Code Council).

Schedule effective October 1, 2025. Last verified: July 22, 2026

This schedule predates Florida's HB 803 (July 2026). Jurisdictions statewide are adopting updated schedules; we check sources weekly. What HB 803 changed

Edgewater Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Plumbing Permit Fees in Edgewater

All projects
$50.00 base, plus $7.00 per fixture, minimum $100.00
Building Permit Surcharge (Statutory, F.S. 553.721 / 468.631)
2.5% of the permit fee, minimum $4.00
Technology Surcharge
10% of the permit fee
Sponsor This Page
Be the Featured Plumber in Edgewater

Homeowners and contractors planning a project check Edgewater plumbing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Edgewater Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work

Fees in Edgewater are the same either way.

fixture
130 fixture
Estimated plumbing permit fee
$174.50
Plumbing permit fee$155.00
$50.00 base, plus $7.00 per fixture, minimum $100.00
Building Permit Surcharge (Statutory, F.S. 553.721 / 468.631)$4.00
Technology Surcharge$15.50
Total Estimate$174.50

Estimate only. Confirm with the Edgewater building department before applying.

Sponsor This Page
Be the Featured Plumber in Edgewater

Homeowners and contractors planning a project check Edgewater plumbing permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Edgewater Permit Fee FAQs

How Much Is a Building Permit in Edgewater?

The building permit for a $50,000 residential remodel runs $500.00, including the documented surcharges and minimum fees. The estimate is built from Edgewater's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Is a Roofing Permit in Edgewater?

The roofing permit for a $20,000 residential re-roof runs $115.10, assuming a 2,000 sq ft (20-square) roof where the schedule prices per unit, based on Edgewater's sourced fee schedule.

How Are Permit Fees Calculated in Edgewater?

A residential building permit is $75.00 plus 0.65% of job value, minimum $75.00. Electrical and Mechanical / HVAC permits scale with the value of the job; Plumbing permits are priced per fixture; Roofing permits are priced per square. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Edgewater?

On top of the base permit fee, the sourced schedule adds Building Permit Surcharge (Statutory, F.S. 553.721 / 468.631) (2.5% of the permit fee, minimum $4.00) and Technology Surcharge (10% of the permit fee). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Edgewater?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed.

Where Do These Fees Come From?

Every figure on this page is sourced from Resolution 2025-R-27 (Fee Schedule, effective 10/1/2025). See the official schedule. Last verified .

Compare Permit Fees Across Volusia County

The same job, priced by each jurisdiction's own fee schedule. Across Volusia County's 13 covered jurisdictions, a building permit for a $50,000 remodel runs from $256.13 (Deltona) to $699.26 (New Smyrna Beach).

JurisdictionBuilding permit ($50k remodel)Roofing permit ($20k re-roof)
Unincorporated Volusia County$470.60$203.13
Daytona Beach$554.90$145.22
DeLand$630.47$216.50
Deltona$256.13$81.00
Edgewater$500.00$115.10
Holly Hill$381.38n/a
Lake Helen$470.60$203.13
New Smyrna Beach$699.26$91.90
Orange City$378.00$79.00
Ormond Beach$458.36$170.25
Ponce Inlet$487.50$209.00
Port Orange$491.88$134.00
South Daytona$583.95n/a

Estimates from each jurisdiction's sourced fee schedule, surcharges and minimum fees included. Where a schedule prices by unit, figures assume a 2,000 sq ft (20-square) roof. "n/a" means the fee isn't documented in our sourced data.

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026.