FreeEvery fee straight from the official city and county fee schedules. No signup.

Bartonville, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Bartonville, straight from the official fee schedule, with a free permit fee calculator below.

A note on these figures from the official schedule. Details

A new home's per-square-foot fee includes the electrical, plumbing and mechanical permits. Commercial trade permits are shown on the Town's commercial valuation table pending confirmation from the Town. Fire alarm and sprinkler permits for homes over 5,000 sq ft and for commercial buildings are issued by the Denton County Emergency Services District and are not included. Building permits in Lantana Town Center (the Kroger area) are issued by Denton County Fresh Water Supply District 6/7, not the Town, and these fees do not apply there.

In Bartonville, a building permit for a remodel runs $585.00 in permit fees, a $10,000 HVAC change-out $130.00, a $10,000 electrical panel upgrade or rewire $130.00, and a $10,000 whole-house repipe $130.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Town of Bartonville Ordinance No. 799-26, Appendix A Fee Schedule (adopted April 21, 2026; effective May 1, 2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Bartonville permit portal, or call 817-693-5280.

Schedule effective May 1, 2026. Last verified: November 20, 2026

Bartonville Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Bartonville

Residential (1–2 family): Addition or remodel to a home or accessory structure
$2.00 per sq ft under roof, minimum $500.00
Residential (1–2 family): New home, all trade permits included
$2.00 per sq ft under roof
Residential (1–2 family): Manufactured home building permit
$2.00 per sq ft under roof, minimum $500.00
Residential (1–2 family): Manufactured home placement permit
$300.00 flat
Residential (1–2 family): Moving a house onto a lot
$2.00 per sq ft under roof
Commercial / 3+ units: Commercial building work (valuation table)
tiered rates by job value
Up to $500
$25.00
Over $500, up to $2,000
$25.00 plus $3.00 per additional $100
Over $2,000, up to $25,000
$70.00 plus $14.00 per additional $1,000
Over $25,000, up to $50,000
$392.00 plus $10.00 per additional $1,000
Over $50,000, up to $100,000
$642.00 plus $7.00 per additional $1,000
Over $100,000, up to $500,000
$992.00 plus $6.00 per additional $1,000
Over $500,000, up to $1,000,000
$3,392.00 plus $5.00 per additional $1,000
Over $1,000,000
$5,892.00 plus $4.00 per additional $1,000
Above-ground pool, spa or hot tub
$100.00 flat
Covered porch, carport or arbor, foundation and utilities extra
$100.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Bartonville

Homeowners and contractors planning a project check Bartonville building permit fees here first.

One sponsor per trade, flat monthly rate.

Bartonville Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

13 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$585.00
Included in this total
Building Permit Fee$400.00
200 sq ft under roof × $2.00 per sq ft under roof
Minimum Permit Fee Adjustment$100.00
Minimum permit fee: $500.00
Plan Review Fee (Addition or Remodel)$85.00‡
Total Estimate$585.00
Not included in this total
Additional Inspection Fee (Residential)$70.00 / inspection
Charged per inspection; depends on your project's number of inspections.

‡ Awaiting confirmation from the jurisdiction.

A note on these figures from the official schedule. Details

A new home's per-square-foot fee includes the electrical, plumbing and mechanical permits. Commercial trade permits are shown on the Town's commercial valuation table pending confirmation from the Town. Fire alarm and sprinkler permits for homes over 5,000 sq ft and for commercial buildings are issued by the Denton County Emergency Services District and are not included. Building permits in Lantana Town Center (the Kroger area) are issued by Denton County Fresh Water Supply District 6/7, not the Town, and these fees do not apply there.

Estimate only. Confirm with the Bartonville building department before applying. Apply online. Phone: 817-693-5280. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Bartonville

Homeowners and contractors planning a project check Bartonville building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Bartonville

Apply online through the Town of Bartonville's Cloudpermit portal; the Town's permits page links how-to videos and the submittal checklists (new residential, remodel or addition, accessory building, pool, generator, irrigation, commercial). All contractors must register with the Town through Cloudpermit and be listed on the permit application. Plans and documents may also be emailed to permits@townofbartonville.com. The Town uses a third-party contractor for inspections: request inspections before 4:00 p.m. Monday through Thursday or before 11:30 a.m. Friday for next-business-day scheduling. Fire alarm and sprinkler permits for homes over 5,000 square feet and for commercial buildings go through the Denton County Emergency Services District. Building permits in Lantana Town Center (the Kroger area) are handled by Denton County Fresh Water Supply District 6/7 (940-728-5050), not the Town.

Source: Bartonville application instructions

Apply online: Bartonville permit portal
Building Department Contact
Address
1941 E. Jeter Road, Bartonville, TX 76226
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Denton County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Bartonville Permit Fee FAQs

How Much Does a Building Permit Cost in Bartonville?

The building permit for a residential remodel runs $585.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Bartonville's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Are Permit Fees Calculated in Bartonville?

A residential building permit is $2.00 per sq ft under roof, minimum $500.00. Electrical, Plumbing, and Mechanical / HVAC permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from Town of Bartonville Ordinance No. 799-26, Appendix A Fee Schedule (adopted April 21, 2026; effective May 1, 2026). See the official schedule. Last verified .

Other Jurisdictions in Denton County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.