FreeEvery fee straight from the official city and county fee schedules. No signup.

DISH, TX Permit Fees (2026)

Building, electrical, plumbing, and mechanical/HVAC permit fees for DISH, straight from the official fee schedule, with a free permit fee calculator below.

In DISH, a building permit for a remodel runs $250.00 in permit fees, a $10,000 HVAC change-out $95.00, a $10,000 electrical panel upgrade or rewire $95.00, and a $10,000 whole-house repipe $95.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Town of DISH Ordinance No. 24-06 (reauthorizing building permit fees, Dec. 9, 2024) with Exhibit A, Code of Ordinances Appendix A Fee Schedule (Ord. 21-12), and the Town Miscellaneous Permit and Accessory Building Permit Applications

Covers building, electrical, plumbing, and mechanical/HVAC permits.

Call the building department at 940-648-2040.

Last verified: November 20, 2026

DISH Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in DISH

Residential (1–2 family): New home, addition or remodel
$0.75 per sq ft (under roof)
Commercial / 3+ units: Commercial interior finish, repair or remodel (50% of the commercial permit fee)
tiered rates by sq ft (50% of the commercial fee (base plus rate on whole area))‡
Up to 2,500 sq ft
$375.00 plus $0.175 per additional sq ft
Over 2,500, up to 10,000 sq ft
$875.00 plus $0.15 per additional sq ft
Over 10,000, up to 50,000 sq ft
$1,750.00 plus $0.125 per additional sq ft
Over 50,000, up to 100,000 sq ft
$6,475.00 plus $0.11 per additional sq ft
Over 100,000, up to 300,000 sq ft
$12,250.00 plus $0.105 per additional sq ft
Over 300,000 sq ft
$33,575.00 plus $0.10 per additional sq ft
Commercial / 3+ units: New commercial building or addition (base plus rate per sq ft of building area)
tiered rates by sq ft‡
Printed base plus the band rate on the whole building area; the printed bases cost less just above 10,000 and 50,000 sq ft
Up to 2,500 sq ft
$750.00 plus $0.35 per additional sq ft
Over 2,500, up to 10,000 sq ft
$1,750.00 plus $0.30 per additional sq ft
Over 10,000, up to 50,000 sq ft
$3,500.00 plus $0.25 per additional sq ft
Over 50,000, up to 100,000 sq ft
$12,950.00 plus $0.22 per additional sq ft
Over 100,000, up to 300,000 sq ft
$24,500.00 plus $0.21 per additional sq ft
Over 300,000 sq ft
$67,150.00 plus $0.20 per additional sq ft
Commercial / 3+ units: Shell building, parking garage or modular building (80% of the commercial permit fee)
tiered rates by sq ft (80% of the commercial fee (base plus rate on whole area))‡
Up to 2,500 sq ft
$600.00 plus $0.28 per additional sq ft
Over 2,500, up to 10,000 sq ft
$1,400.00 plus $0.24 per additional sq ft
Over 10,000, up to 50,000 sq ft
$2,800.00 plus $0.20 per additional sq ft
Over 50,000, up to 100,000 sq ft
$10,360.00 plus $0.176 per additional sq ft
Over 100,000, up to 300,000 sq ft
$19,600.00 plus $0.168 per additional sq ft
Over 300,000 sq ft
$53,720.00 plus $0.16 per additional sq ft
Accessory building without A/C, up to 600 sq ft
tiered rates by sq ft (Ordinance and Town form agree only to 600 sq ft without A/C)‡
Up to 200 sq ft
$0.00
Over 200, up to 600 sq ft
$150.00
Covered porch, carport or arbor; foundation and utilities extra
$70.00 flat
Deck over thirty inches high
$70.00 flat
Demolition permit
$100.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in DISH

Homeowners and contractors planning a project check DISH building permit fees here first.

One sponsor per trade, flat monthly rate.

DISH Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

9 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$250.00
Included in this total
Building Permit Fee$150.00
200 sq ft (under roof) × $0.75 per sq ft (under roof)
Certificate of Occupancy (Residential)$25.00‡
Permit Application Fee (Residential)$75.00
Total Estimate$250.00

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the DISH building department before applying. Phone: 940-648-2040. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in DISH

Homeowners and contractors planning a project check DISH building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in DISH

Download the permit application for your project from the Town of DISH Permits page (Building Permits folder), complete it, and email it with your plans to contact@townofdish.com or bring it to Town Hall at 5413 Tim Donald Road. There is no online permit portal. Fees can be paid online through GovPayNet or at Town Hall, and commercial permit fees must be paid before the Town accepts plans for review. Contractors must register with the Town before a permit is issued. Inspections are scheduled with Atlas Municipal Services at (903) 268-5535 or services@atlasmunicipal.net; inspections called in by 4 p.m. are done the next day.

Source: DISH application instructions

Building Department Contact
Address
5413 Tim Donald Road, DISH, TX 76247
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Denton County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

DISH Permit Fee FAQs

How Much Does a Building Permit Cost in DISH?

The building permit for a residential remodel runs $250.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from DISH's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Are Permit Fees Calculated in DISH?

A residential building permit is $0.75 per sq ft (under roof). Electrical, Plumbing, and Mechanical / HVAC permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in DISH?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (Commercial) (25% of the permit fee). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Town of DISH Ordinance No. 24-06 (reauthorizing building permit fees, Dec. 9, 2024) with Exhibit A, Code of Ordinances Appendix A Fee Schedule (Ord. 21-12), and the Town Miscellaneous Permit and Accessory Building Permit Applications. See the official schedule. Last verified .

Other Jurisdictions in Denton County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.