FreeEvery fee straight from the official city and county fee schedules. No signup.

Little Elm, TX Permit Fees (2026)

Building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Little Elm, straight from the official fee schedule, with a free permit fee calculator below.

In Little Elm, a building permit for a remodel runs $320.00 in permit fees, a $20,000 re-roof $125.00, a $10,000 HVAC change-out $100.00, a $10,000 electrical panel upgrade or rewire $100.00, and a $10,000 whole-house repipe $100.00. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Development Services Comprehensive Fee Schedule, updated June 18, 2019 (Ord. No. 1505)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Little Elm permit portal, or call 214-975-0456.

How Little Elm values a job: Commercial and multi-family new construction is valued at the current ICC square foot construction cost for the construction type times the floor area; commercial finish-out and miscellaneous work uses the declared value; homes are priced per gross square foot.

Last verified: November 20, 2026

Little Elm Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Little Elm

Residential (1–2 family): Home addition, remodel or fire damage repair
$0.85 per sq ft (gross, addition or affected area)
Residential (1–2 family): New home or duplex
$0.85 per sq ft (gross)
Residential (1–2 family): Above-ground pool or spa
$100.00 flat
Residential (1–2 family): In-ground pool and spa
$250.00 flat
Residential (1–2 family): In-ground pool only
$200.00 flat
Residential (1–2 family): Residential curb cut or driveway approach
$100.00 flat
Residential (1–2 family): Residential driveway or flatwork
$50.00 flat
Residential (1–2 family): Manufactured home placement
$200.00 flat

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Little Elm

Homeowners and contractors planning a project check Little Elm building permit fees here first.

One sponsor per trade, flat monthly rate.

Little Elm Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work
Job type

14 documented rates for this permit type; pick the one that matches your job.

sq ft
505,000 sq ft
Estimated building permit fee
$320.00
Included in this total
Building Permit Fee$170.00
200 sq ft (gross, addition or affected area) × $0.85 per sq ft (gross, addition or affected area)
Permit Application Fee (1 and 2 Family)$50.00‡
Plan Review Fee (Residential Addition, Alteration or Pool)$100.00‡
Total Estimate$320.00
Not included in this total
MEP Trade Fee (Residential Addition or Alteration, Each Trade)$50.00 / trade
Charged per trade (electrical, mechanical or plumbing); depends on your project's number of trades.

‡ Awaiting confirmation from the jurisdiction.

Estimate only. Confirm with the Little Elm building department before applying. Apply online. Phone: 214-975-0456. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Little Elm

Homeowners and contractors planning a project check Little Elm building permit fees here first.

One sponsor per trade, flat monthly rate.

How to Apply for a Permit in Little Elm

Apply for building, trade, roof, pool and fence permits online through the Town's MyGov portal; contractors register as collaborators in MyGov first.

Town staff confirm the submittal and invoice the application fee; plan review starts once plans and application fees are received (ten business days for most projects).

Building Safety is at Town Hall, Second Floor, 100 W. Eldorado Parkway, Little Elm, TX 75068.

Source: Little Elm application instructions

Apply online: Little Elm permit portal
Building Department Contact
Address
Town Hall, Second Floor, 100 W. Eldorado Parkway, Little Elm, TX 75068
Hours
Monday-Thursday 7:30 a.m. to 5:30 p.m.
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Denton County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Little Elm Permit Fee FAQs

How Much Does a Building Permit Cost in Little Elm?

The building permit for a residential remodel runs $320.00, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Little Elm's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Little Elm?

The roofing permit for a $20,000 residential re-roof runs $125.00, based on Little Elm's sourced fee schedule.

How Are Permit Fees Calculated in Little Elm?

A residential building permit is $0.85 per sq ft (gross, addition or affected area). Electrical, Plumbing, and Mechanical / HVAC permits scale with the value of the job; Roofing permits are flat fees. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Little Elm?

On top of the base permit fee, the sourced schedule adds Plan Review Fee (25% of the permit fee, jobs over $2,000,000 only or 50% of the permit fee, jobs up to $2,000,000 only, depending on the permit) and Plan Review Fee (Commercial or Multi-Family Remodel) (50% of the permit fee, minimum $100.00). Each is included in the estimates it applies to; the fee schedule above shows which permits and job types each one covers.

Where Do These Fees Come From?

Every figure on this page is sourced from Development Services Comprehensive Fee Schedule, updated June 18, 2019 (Ord. No. 1505). See the official schedule. Last verified .

Other Jurisdictions in Denton County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.