Pleak, TX Permit Fees (2026)

Building permit fees and building permit fees for Pleak, straight from the official fee schedule, with a free permit fee calculator below.

Fort Bend County's Engineering Department issues development permits in the Village of Pleak under an interlocal agreement for floodplain administration, and the Village's Ordinance 24-112 adopts the county's flood regulations with the permit fee as reflected in the Fort Bend County Fee Schedule. No fire code agreement between the Village and the county was found, so ask the county Fire Marshal whether the Fire Marshal fees shown apply to commercial buildings in the Village. See the Fort Bend County fee schedule

The Village of Pleak publishes no building, electrical, plumbing or mechanical permit fee. Fort Bend County issues development permits in the Village on the county's schedule: a flat development permit ($100, or $150 in a floodplain) for new structures of 400 square feet or more, floodplain work and similar development. No county fire code agreement covering the Village was found, so Fire Marshal fees shown for commercial, public and larger multifamily buildings may not apply. Work started without a permit is charged double. Village platting, plan review and zoning fees and the Village's $25 permit for work on Village property or rights of way are separate.

Every documented fee up top, then calculate an itemized estimate for your job below.

Jump to Permit Fee Calculator

Source

Fort Bend County Departmental Fee Collection Schedule FY2027 (Commissioners Court Item 20A, 9/10/2026, effective 10/1/2026)

Covers building permits.

Official Fee Schedule

Apply online at the Pleak permit portal, or call 281-633-7500.

How Pleak values a job: Fort Bend County issues flat development permits rather than building-code permits, and its Fire Marshal fee for commercial buildings is priced per 1,000 square feet of gross floor area.

Schedule effective October 1, 2026. Last verified: November 3, 2026

Pleak Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Pleak

Residential (1–2 family): Addition or building modification of 400 sq ft or more (development permit)

$100.00 flat‡

Residential (1–2 family): New home, mobile home or accessory structure of 400 sq ft or more (development permit)

$100.00 flat

Residential (1–2 family): Addition or modification in a floodplain (Special Flood Hazard Area)

$150.00 flat‡

Residential (1–2 family): New home or structure in a floodplain (Special Flood Hazard Area)

$150.00 flat

Commercial / 3+ units: Interior lease build-out or change of ownership or use, platted property (development permit)

$100.00 flat

Commercial / 3+ units: Commercial development on platted property (development permit)

$100.00 flat

Commercial / 3+ units: Interior build-out or change of ownership or use, unplatted property (development permit)

$250.00 flat‡

Commercial / 3+ units: Commercial development on unplatted property (development permit)

$250.00 flat

Address verification and power release (new construction)

$25.00‡

Civil site plan review (County Engineer, commercial) (new construction)

$275.00‡

Fire Marshal construction or build-out fee (per 1,000 sq ft)

tiered by sq ft (gross)

Over 0 sq ft

$250.00 per 1,000 sq ft

Fire Marshal site and civil plan review (new commercial building) (new construction)

$250.00‡

Commercial cooking exhaust duct test (lights and smoke) (if applicable)

$300.00

Commercial cooking fire extinguishing system permit (if applicable)

$300.00

Commercial driveway (right-of-way permit) (if applicable)

$550.00

Emergency responder radio coverage system permit (if applicable)

$300.00

Fire alarm or detection system devices (if applicable)

$1.00 per device

Fire alarm or detection system permit (base) (if applicable)

$300.00

Fire Marshal certificate of compliance (change of use or ownership) (if applicable)

$250.00

Fire Marshal plan re-submittal (changes after initial submittal) (if applicable)

$200.00

Fire Marshal re-inspection or failure to show (if applicable)

$300.00

Fire pump permit (if applicable)

$350.00

Fire sprinkler heads (if applicable)

$1.00 per head (sprinkler)

Fire sprinkler system permit (per riser) (if applicable)

tiered by riser (sprinkler) ($300 per riser for risers 1 to 5, then $100 per riser)‡

Up to 5 risers

$300.00 per riser

Over 5 risers

$100.00 per riser

Residential driveway on curb and gutter (right-of-way permit) (if applicable)

$150.00‡

Temporary construction driveway (right-of-way permit) (if applicable)

$165.00

Underground fire main and backflow preventer plans (if applicable)

$300.00

‡ Awaiting confirmation from the jurisdiction.

Mechanical / HVAC Permit Fees in Pleak

Pleak issues no mechanical or HVAC permit. The Village of Pleak publishes no electrical, plumbing or mechanical permit, form or fee, and Fort Bend County, which issues development permits in the Village, issues no trade permits. A 2004 Village ordinance adopted building and trade codes, so call the Village at (281) 239-8504 before trade work if unsure.

Sponsor This Page

Be the Featured HVAC Company in Pleak

Homeowners and contractors planning a project check Pleak mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Pleak Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type

Project type

Kind of work

Pleak does not have a documented mechanical / HVAC fee for this project type in our sourced data yet. Check the official fee schedule linked above, or ask the building department.

Permit fees for Pleak are administered by Fort Bend County; the fees shown are the Fort Bend County schedule.

Estimate only. Confirm with the Fort Bend County building department before applying. Apply online. Phone: 281-633-7500. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page

Be the Featured HVAC Company in Pleak

Homeowners and contractors planning a project check Pleak mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Pleak

Fort Bend County's Engineering Department issues development permits inside the Village of Pleak under an interlocal agreement. Apply online through the county's MyGovernmentOnline portal at mgoconnect.org (create an account, then a Residential or Commercial Development Permit application); a Residential Development Permit is required for any new structure on residential property, or addition to an existing structure, of 400 square feet or more, and work in the floodplain needs a permit too. New structures need a CenterPoint address verification letter, and an application includes a site plan, the recorded deed, a metes and bounds description for property outside a platted subdivision, septic design drawings where a septic system will serve the structure, and other agencies' permits. Commercial projects first get County Engineer approval of civil construction drawings. Fees are paid to the county, and work started before the permit is issued pays double. Applications, power release and inspection requests go to Permits@fbctx.gov or 281-633-7500. Sign permits, plats, plan review and zoning requests go to the Village of Pleak, 6621 FM 2218 South, Richmond, open Monday through Friday from 8 AM to 12 PM, (281) 239-8504, pleakvillage@yahoo.com, and work on Village property or rights of way needs a Village permit.

Source: Pleak application instructions

Apply online: Pleak permit portal

Building Department Contact

Phone: 281-633-7500
Email: Permits@fbctx.gov
Address: 301 Jackson St., 4th Floor, Richmond, TX 77469
Hours: Monday through Friday 8 AM to 4 PM
Village: (281) 239-8504, pleakvillage@yahoo.com, 6621 FM 2218 South, Richmond, TX 77469, Monday through Friday 8 AM to 12 PM
Source: Official contact page

Pleak Permit Fee FAQs

How Much Does a Building Permit Cost in Pleak?

The building permit for a $50,000 residential remodel runs $100.00, including the documented surcharges and minimum fees. The estimate is built from Pleak's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

Where Do These Fees Come From?

Every figure on this page is sourced from Fort Bend County Departmental Fee Collection Schedule FY2027 (Commissioners Court Item 20A, 9/10/2026, effective 10/1/2026). See the official schedule. Last verified November 3, 2026.

Other Jurisdictions in Fort Bend County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

Unincorporated Fort Bend County Arcola Beasley Fairchilds Fulshear Meadows Place Missouri City NeedvillePleakRichmond Rosenberg Simonton Stafford Sugar Land Thompsons Weston Lakes

Pleak, TX Permit Fees (2026)

Pleak Permit Fee Schedule

Building Permit Fees in Pleak

Electrical Permit Fees in Pleak

Plumbing Permit Fees in Pleak

Mechanical / HVAC Permit Fees in Pleak

Roofing Permit Fees in Pleak

Pleak Permit Fee Calculator

How to Apply for a Permit in Pleak

Pleak Permit Fee FAQs

How Much Does a Building Permit Cost in Pleak?

Where Do These Fees Come From?

Other Jurisdictions in Fort Bend County

Get in Touch