FreeEvery fee straight from the official city and county fee schedules. No signup.

Golf, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Golf, straight from the official fee schedule, with a free permit fee calculator below.

Fee change pending. These figures use the current adopted schedule. Details

The Village Council took up Resolution No. 2026-34 on October 21, 2026, which replaces this fee schedule (Res. 2026-27) to comply with 2026 HB 803; the outcome has not been published yet, and the new figures are not shown until the adopted schedule is published. Remodels and commercial interior buildouts show no estimate: the Village's schedule does not say how an interior remodel is priced. Ask the Village Clerk at 561-732-0236. See the official notice

In Golf, a re-roof runs $1,025.00 in permit fees, a $10,000 HVAC change-out $358.75, a $10,000 electrical panel upgrade or rewire $358.75, and a $10,000 whole-house repipe $358.75. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 2,000 sq ft roof. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator
Source

Village of Golf Res. 2026-27, Exhibit A: Schedule of Rates, Fees and Charges (effective July 8, 2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Apply online at the Golf permit portal, or call 561-732-0236.

Schedule effective July 8, 2026. Last verified: September 29, 2026

Schedule adopted under Florida's HB 803 permit fee rules (effective July 2026). What HB 803 changed

Golf Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Golf

New construction, licensed contractor
$2.80 per sq ft of building (printed as square foot x $175 x 0.016; includes sub-permits)
Awning or pergola (electric, includes sub-permit)
$775.00 flat
Awning or pergola (non-electric)
$550.00 flat
Construction trailer (electric, includes sub-permit)
$550.00 flat
Construction trailer (non-electric)
$400.00 flat
Demolition
$550.00 flat
Driveway
$750.00 flat
Fence, gate or wall
$400.00 flat

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page
Be the Featured General Contractor in Golf

Homeowners and contractors planning a project check Golf building permit fees here first.

One sponsor per trade, $39 a month, month to month.

Golf Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type
Project type
Kind of work

Golf does not have a documented building fee for this project type in our sourced data yet. Check the official fee schedule linked above, or ask the building department.

Fee change pending. These figures use the current adopted schedule. Details

The Village Council took up Resolution No. 2026-34 on October 21, 2026, which replaces this fee schedule (Res. 2026-27) to comply with 2026 HB 803; the outcome has not been published yet, and the new figures are not shown until the adopted schedule is published. Remodels and commercial interior buildouts show no estimate: the Village's schedule does not say how an interior remodel is priced. Ask the Village Clerk at 561-732-0236. See the official notice

Estimate only. Confirm with the Golf building department before applying. Apply online. Phone: 561-732-0236. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page
Be the Featured General Contractor in Golf

Homeowners and contractors planning a project check Golf building permit fees here first.

One sponsor per trade, $39 a month, month to month.

How to Apply for a Permit in Golf

Apply online through the Village of Golf's MGO Connect portal; the Village no longer accepts paper applications. Register as a contractor or owner/builder, upload your plans and documents, pay fees and schedule inspections in the portal. Every online application must include the signed and notarized Palm Beach County Universal County-Wide/Municipal Building Permit Application form. Non-structural residential work valued under $7,500 with no electrical, plumbing, mechanical, gas or structural work can use the Village's No-Fee Building Permit Application, emailed to dlynn@villageofgolf.org and kboling@villageofgolf.org.

Source: Golf application instructions

Apply online: Golf permit portal
Building Department Contact
Email
dlynn@villageofgolf.org (Village Clerk Donn Lynn); kboling@villageofgolf.org (Assistant Village Clerk Kristi Boling)
Address
Village Hall, 21 Country Road, Village of Golf, FL 33436
Sponsor This Spot · Permit Help
Be the Featured Permit Expediter in Palm Beach County

Your name, phone and website right here, next to the building department's contact info, where people look right before they apply.

One expediter per county.

Golf Permit Fee FAQs

How Much Does a Roofing Permit Cost in Golf?

The roofing permit for a residential re-roof runs $1,025.00, assuming a 2,000 sq ft roof (the schedule prices per unit), based on Golf's sourced fee schedule.

How Are Permit Fees Calculated in Golf?

Electrical, Plumbing, and Mechanical / HVAC permits are flat fees; Roofing permits are priced per sq ft. New construction is priced separately from remodel and alteration work; the calculator asks which kind of job yours is. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Golf?

On top of the base permit fee, the sourced schedule adds State Building Code Administrators Surcharge (F.S. 468.631) (1.5% of the permit fee, minimum $2.00) and State Building Permit Surcharge (F.S. 553.721) (1% of the permit fee, minimum $2.00). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Golf?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from Village of Golf Res. 2026-27, Exhibit A: Schedule of Rates, Fees and Charges (effective July 8, 2026). See the official schedule. Last verified .

Other Jurisdictions in Palm Beach County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save. Wondering whether fees changed this year? See which Florida fee schedules are new.

Contact

Get in Touch

Missing a jurisdiction? Spotted a fee that looks off? Request coverage for a city or county, report an issue, or ask about sponsorship. We typically reply within one business day.