Miami Springs, FL Permit Fees (2026)

Building permit fees and building, electrical, plumbing, mechanical/HVAC, and roofing permit fees for Miami Springs, straight from the official fee schedule, with a free permit fee calculator below.

In Miami Springs, a building permit for a remodel runs $632.50 in permit fees, a re-roof $347.50, an HVAC change-out $174.25, an electrical panel upgrade or rewire $174.25, and a whole-house repipe $300.32. Totals include the documented surcharges and minimum fees; where the schedule prices by unit, figures assume a 200 sq ft remodel area, a 2,000 sq ft roof, a 3-ton system, 200 A service, and a 15-fixture scope. Each figure is that single permit only: a job that combines trades, like a kitchen remodel with electrical and plumbing work, pays each applicable permit. Pick a project to load it in the calculator below.

Jump to Permit Fee Calculator

Source

City of Miami Springs, Schedule of Charges for Building, Plumbing, Electrical, Mechanical and Other Related Permits and Fees (revised 07/01/2026)

Covers building, electrical, plumbing, mechanical/HVAC, and roofing permits.

Official Fee Schedule

Apply online at the Miami Springs permit portal, or call (305) 805-5030.

How Miami Springs values a job: Building, electrical, plumbing, mechanical and roofing permit fees are priced primarily by physical unit (square footage, amperage, fixture count, tonnage, BTU capacity) rather than job valuation. Where a fee is charged on valuation, the schedule states that the method of determining the minimum valuation on which permits are based is established by the Building Official in conjunction with the Miami-Dade County Office of Code Compliance.

Schedule effective July 1, 2026. Last verified: September 6, 2026

Schedule adopted under Florida's HB 803 permit fee rules (effective July 2026). What HB 803 changed

Miami Springs Permit Fee Schedule

Every documented rule for each permit type, straight from the official schedule.

Building Permit Fees in Miami Springs

Residential (1–2 family)

tiered rates by sq ft, minimum $150.00‡

The schedule prints a per square foot rate for each band; applied to the area above the band's lower bound, on top of the fee at that bound, which keeps the fee continuous

Up to 300 sq ft

$540.00

Over 300, up to 650 sq ft

$850.00

Over 650, up to 10,000 sq ft

$850.00 plus $1.15 per additional sq ft

Commercial / 3+ units

tiered rates by sq ft, minimum $200.00‡

The schedule prints a per square foot rate for each band; applied to the area above the band's lower bound, on top of the fee at that bound, which keeps the fee continuous

Up to 10,000 sq ft

$1,800.00

Over 10,000, up to 30,000 sq ft

$1,800.00 plus $1.75 per additional sq ft

Over 30,000 sq ft

$36,800.00 plus $1.50 per additional sq ft

Miami-Dade Code Compliance Fee

0.05% of job value‡

State Building Code Administrators Surcharge (F.S. 468.631)

1.5% of the permit fee, minimum $2.00†

State Building Permit Surcharge (F.S. 553.721)

1% of the permit fee, minimum $2.00†

Technology Fee

10% of the permit fee‡

Private Provider Reduction, Inspections (Commercial)

may reduce the permit fee by 25% (printed as a 25% discount applied to the base permit fee)

Private Provider Reduction, Plan Review (Commercial)

may reduce the permit fee by 25% (printed as a 25% discount applied to the base permit fee)

Private Provider Reduction, Plan Review and Inspections (Commercial)

may reduce the permit fee by 50% (printed as a 50% discount applied to the base permit fee)

After Hours Inspection / Expedited Review (if applicable)

$150.00

After Hours Inspection / Expedited Review (if applicable)

$250.00

Certificate of Occupancy / Certificate of Completion (if applicable)

$250.00

Courtesy Inspection (if applicable)

$125.00

Lost Plan Fee (if applicable)

30% of the permit fee, minimum $100.00, maximum $500.00

Permit Card Replacement (if applicable)

$30.00

Permit Extension (if applicable)

$100.00

Renewal of Expired Permit (Final Inspection Only) (if applicable)

$125.00

Structural Processing Fee (if applicable)

$150.00

Structural Processing Fee (if applicable)

$100.00

Temporary Certificate of Occupancy / Completion (if applicable)

$125.00

Thirty Year Recertification, Initial (if applicable)

$350.00

Upfront Processing Fee (paid when you apply, counts toward the permit fee)

$0.03 per sq ft‡

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Mechanical / HVAC Permit Fees in Miami Springs

All projects

$15.00 per ton or fraction thereof, minimum $150.00

Boilers and Pressure Vessels

tiered rates by btus

Up to 200,000 btus

$125.00

Over 200,000 btus

$125.00 plus $25.00 per additional 100,000 btus

Heating Units

tiered rates by units

Up to 5 units

$0.00 plus $31.25 per additional unit

Over 5 units

$156.25 plus $18.75 per additional unit

Miami-Dade Code Compliance Fee

0.05% of job value‡

State Building Code Administrators Surcharge (F.S. 468.631)

1.5% of the permit fee, minimum $2.00†

State Building Permit Surcharge (F.S. 553.721)

1% of the permit fee, minimum $2.00†

Technology Fee

10% of the permit fee‡

After Hours Inspection / Expedited Review (if applicable)

$150.00

After Hours Inspection / Expedited Review (if applicable)

$250.00

Certificate of Occupancy / Certificate of Completion (if applicable)

$250.00

Courtesy Inspection (if applicable)

$125.00

Permit Card Replacement (if applicable)

$30.00

Permit Extension (if applicable)

$100.00

Renewal of Expired Permit (Final Inspection Only) (if applicable)

$125.00

Temporary Certificate of Occupancy / Completion (if applicable)

$125.00

† Corroborated across official sources, but not printed line-for-line in the linked schedule.

‡ Awaiting confirmation from the jurisdiction.

Sponsor This Page

Be the Featured HVAC Company in Miami Springs

Homeowners and contractors planning a project check Miami Springs mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

Miami Springs Permit Fee Calculator

Pick a permit type and adjust the job value. Total updates instantly, itemized below.

Permit type

Project type

Kind of work

Fees in Miami Springs are the same either way.

Job type

3 documented rates for this permit type; pick the one that matches your job.

Cooling capacity (tons)

tons

110 tons

Estimated mechanical / HVAC permit fee

$174.25

Included in this total

Mechanical / HVAC Permit Fee$45.00

3 tons × $15.00 per ton

Minimum Permit Fee Adjustment$105.00

Minimum permit fee: $150.00

Miami-Dade Code Compliance Fee$5.00‡

State Building Code Administrators Surcharge (F.S. 468.631)$2.25

State Building Permit Surcharge (F.S. 553.721)$2.00

Technology Fee$15.00‡

Total Estimate$174.25

‡ Awaiting confirmation from the jurisdiction.

Assumes a $10,000.00 total job value for valuation-based surcharges.

Estimate only. Confirm with the Miami Springs building department before applying. Apply online. Phone: (305) 805-5030. Permit fees only; excludes impact fees, utility connection charges, and other non-permit charges.

Sponsor This Page

Be the Featured HVAC Company in Miami Springs

Homeowners and contractors planning a project check Miami Springs mechanical / HVAC permit fees here first. One sponsor per trade, flat monthly rate.

Advertise on This Page

How to Apply for a Permit in Miami Springs

Apply online through the City's eTRAKiT portal: log in or create a public or contractor account, choose Apply / New Permit, then enter the permit type, a description of the work, the job value and the address. The Building Department emails you when review is complete. You pay online, then the department activates the permit and sends a link to the approved plans. You can print the permit card and schedule inspections from your eTRAKiT account. In-person help is at City Hall, Building Department, second floor; permit submittals are accepted Monday to Friday 8:00am to 4:00pm, closed 12:00pm to 1:00pm.

Source: Miami Springs application instructions

Apply online: Miami Springs permit portal

Building Department Contact

Phone: (305) 805-5030
Address: City Hall Building Department, Second Floor, 201 Westward Drive, Miami Springs, FL 33166
Hours: Monday to Friday 8:00am to 4:45pm (permit submittals 8:00am to 4:00pm; closed 12:00pm to 1:00pm)
Source: Official contact page

Miami Springs Permit Fee FAQs

How Much Does a Building Permit Cost in Miami Springs?

The building permit for a residential remodel runs $632.50, assuming a 200 sq ft remodel area (the schedule prices per unit), including the documented surcharges and minimum fees. The estimate is built from Miami Springs's sourced fee schedule, and it covers the building permit alone; a job that combines trades pays each applicable permit. Calculate your job's value for an itemized total.

How Much Does a Roofing Permit Cost in Miami Springs?

The roofing permit for a residential re-roof runs $347.50, assuming a 2,000 sq ft roof (the schedule prices per unit), based on Miami Springs's sourced fee schedule.

How Are Permit Fees Calculated in Miami Springs?

A residential building permit is tiered rates by sq ft, minimum $150.00. Electrical permits are priced per amp; Plumbing permits are priced per fixture; Mechanical / HVAC permits are priced per ton; Roofing permits are priced per sq ft. Every rate comes straight from the sourced fee schedule above. Enter your job's details for an itemized total.

What Surcharges Are Added to Permits in Miami Springs?

On top of the base permit fee, the sourced schedule adds State Building Code Administrators Surcharge (F.S. 468.631) (1.5% of the permit fee, minimum $2.00), State Building Permit Surcharge (F.S. 553.721) (1% of the permit fee, minimum $2.00) and Technology Fee (10% of the permit fee). These are included in every estimate on this page.

Do I Need a Permit for a Small Residential Job in Miami Springs?

Florida's HB 803 (effective July 2026) exempts certain single-family work under $7,500 from permitting statewide, excluding electrical, plumbing, structural, mechanical, and gas work. Confirm with the building department whether your job qualifies before skipping a permit. Read what HB 803 changed and what it saves.

Where Do These Fees Come From?

Every figure on this page is sourced from City of Miami Springs, Schedule of Charges for Building, Plumbing, Electrical, Mechanical and Other Related Permits and Fees (revised 07/01/2026). See the official schedule. Last verified September 6, 2026.

Other Jurisdictions in Miami-Dade County

Jobs inside another city's limits are permitted by that city; unincorporated areas by the county.

New to Florida permit fees? Read our Florida permit fee guide: how schedules are set, the statutory surcharges, and what HB 803 changed in 2026. Pulling a commercial permit or a small residential job? See what HB 803 lets you save. Wondering whether fees changed this year? See which Florida fee schedules are new.

Miami Springs, FL Permit Fees (2026)

Miami Springs Permit Fee Schedule

Building Permit Fees in Miami Springs

Electrical Permit Fees in Miami Springs

Plumbing Permit Fees in Miami Springs

Mechanical / HVAC Permit Fees in Miami Springs

Roofing Permit Fees in Miami Springs

Miami Springs Permit Fee Calculator

How to Apply for a Permit in Miami Springs

Miami Springs Permit Fee FAQs

How Much Does a Building Permit Cost in Miami Springs?

How Much Does a Roofing Permit Cost in Miami Springs?

How Are Permit Fees Calculated in Miami Springs?

What Surcharges Are Added to Permits in Miami Springs?

Do I Need a Permit for a Small Residential Job in Miami Springs?

Where Do These Fees Come From?

Other Jurisdictions in Miami-Dade County

Get in Touch